target/linux/ramips/dts/mt7620a_planex_cs-qr10.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
  10         model = "Planex CS-QR10";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_power: power {
  23                         label = "cs-qr10:red:power";
  24                         gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
  25                 };
  26         };
  27
  28         keys {
  29                 compatible = "gpio-keys-polled";
  30                 poll-interval = <20>;
  31
  32                 s1 {
  33                         label = "reset";
  34                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37
  38                 s2 {
  39                         label = "wps";
  40                         gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
  41                         linux,code = <KEY_WPS_BUTTON>;
  42                 };
  43         };
  44 };
  45
  46 &gpio0 {
  47         status = "okay";
  48 };
  49
  50 &gpio1 {
  51         status = "okay";
  52 };
  53
  54 &gpio2 {
  55         status = "okay";
  56 };
  57
  58 &gpio3 {
  59         status = "okay";
  60 };
  61
  62 &i2c {
  63         status = "okay";
  64 };
  65
  66 &i2s {
  67         status = "okay";
  68         pinctrl-names = "default";
  69         pinctrl-0 = <&pcm_i2s_pins>;
  70 };
  71
  72 &spi0 {
  73         status = "okay";
  74
  75         m25p80@0 {
  76                 compatible = "jedec,spi-nor";
  77                 reg = <0>;
  78                 spi-max-frequency = <10000000>;
  79
  80                 partitions {
  81                         compatible = "fixed-partitions";
  82                         #address-cells = <1>;
  83                         #size-cells = <1>;
  84
  85                         partition@0 {
  86                                 label = "u-boot";
  87                                 reg = <0x0 0x30000>;
  88                                 read-only;
  89                         };
  90
  91                         partition@30000 {
  92                                 label = "u-boot-env";
  93                                 reg = <0x30000 0x10000>;
  94                                 read-only;
  95                         };
  96
  97                         factory: partition@40000 {
  98                                 label = "factory";
  99                                 reg = <0x40000 0x10000>;
 100                                 read-only;
 101                         };
 102
 103                         partition@50000 {
 104                                 compatible = "denx,uimage";
 105                                 label = "firmware";
 106                                 reg = <0x50000 0x7b0000>;
 107                         };
 108                 };
 109         };
 110 };
 111
 112 &pcm {
 113         status = "okay";
 114 };
 115
 116 &gdma {
 117         status = "okay";
 118 };
 119
 120 &pinctrl {
 121         state_default: pinctrl0 {
 122                 gpio {
 123                         ralink,group = "spi refclk", "rgmii1";
 124                         ralink,function = "gpio";
 125                 };
 126                 wdt {
 127                         ralink,group = "wdt";
 128                         ralink,function = "wdt refclk";
 129                 };
 130         };
 131 };
 132
 133 &ethernet {
 134         pinctrl-names = "default";
 135         pinctrl-0 = <&ephy_pins>;
 136         mtd-mac-address = <&factory 0x4>;
 137         mediatek,portmap = "llllw";
 138 };
 139
 140 &gsw {
 141         ralink,port4 = "ephy";
 142 };
 143
 144 &sdhci {
 145         status = "okay";
 146 };
 147
 148 &ehci {
 149         status = "okay";
 150 };
 151
 152 &ohci {
 153         status = "okay";
 154 };
 155
 156 &wmac {
 157         ralink,mtd-eeprom = <&factory 0>;
 158 };