ramips: mt7621: Add new device AsiaRF AP7621-NV1
[oweals/openwrt.git] / target / linux / ramips / dts / mt7620a_iodata_wn-ac1167gr.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7620a.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10         compatible = "iodata,wn-ac1167gr", "ralink,mt7620a-soc";
11         model = "I-O DATA WN-AC1167GR";
12
13         aliases {
14                 led-boot = &led_power;
15                 led-failsafe = &led_power;
16                 led-running = &led_power;
17                 led-upgrade = &led_power;
18         };
19
20         leds {
21                 compatible = "gpio-leds";
22
23                 led_power: power {
24                         label = "wn-ac1167gr:green:power";
25                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
26                         default-state = "on";
27                 };
28
29                 wlan2g {
30                         label = "wn-ac1167gr:green:wlan2g";
31                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
32                 };
33
34                 notification {
35                         label = "wn-ac1167gr:green:notification";
36                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
37                 };
38
39                 wlan5g {
40                         label = "wn-ac1167gr:green:wlan5g";
41                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
42                 };
43         };
44
45         keys {
46                 compatible = "gpio-keys-polled";
47                 poll-interval = <20>;
48
49                 wps {
50                         label = "wps";
51                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
52                         linux,code = <KEY_WPS_BUTTON>;
53                 };
54
55                 reset {
56                         label = "reset";
57                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
58                         linux,code = <KEY_RESTART>;
59                 };
60
61                 auto {
62                         label = "auto";
63                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
64                         linux,code = <BTN_0>;
65                         linux,input-type = <EV_SW>;
66                 };
67         };
68 };
69
70 &spi0 {
71         status = "okay";
72
73         flash@0 {
74                 compatible = "jedec,spi-nor";
75                 reg = <0>;
76                 spi-max-frequency = <10000000>;
77
78                 partitions {
79                         compatible = "fixed-partitions";
80                         #address-cells = <1>;
81                         #size-cells = <1>;
82
83                         partition@0 {
84                                 label = "u-boot";
85                                 reg = <0x0 0x30000>;
86                                 read-only;
87                         };
88
89                         partition@30000 {
90                                 label = "u-boot-env";
91                                 reg = <0x30000 0x10000>;
92                                 read-only;
93                         };
94
95                         factory: partition@40000 {
96                                 label = "factory";
97                                 reg = <0x40000 0x8000>;
98                                 read-only;
99                         };
100
101                         iNIC_rf: partition@48000 {
102                                 label = "iNIC_rf";
103                                 reg = <0x48000 0x8000>;
104                                 read-only;
105                         };
106
107                         partition@50000 {
108                                 label = "NoUsed";
109                                 reg = <0x50000 0x20000>;
110                                 read-only;
111                         };
112
113                         partition@70000 {
114                                 compatible = "denx,uimage";
115                                 label = "firmware";
116                                 reg = <0x70000 0x6b4000>;
117                         };
118
119                         partition@724000 {
120                                 label = "manufacture";
121                                 reg = <0x724000 0x8c000>;
122                                 read-only;
123                         };
124
125                         partition@7b0000 {
126                                 label = "backup";
127                                 reg = <0x7b0000 0x10000>;
128                                 read-only;
129                         };
130
131                         partition@7c0000 {
132                                 label = "storage";
133                                 reg = <0x7c0000 0x40000>;
134                                 read-only;
135                         };
136                 };
137         };
138 };
139
140 &ethernet {
141         pinctrl-names = "default";
142         pinctrl-0 = <&rgmii1_pins &mdio_pins>;
143         mtd-mac-address = <&factory 0x4>;
144
145         port@5 {
146                 status = "okay";
147                 mediatek,fixed-link = <1000 1 1 1>;
148                 phy-mode = "rgmii";
149         };
150
151         mdio-bus {
152                 #address-cells = <1>;
153                 #size-cells = <0>;
154                 status = "okay";
155
156                 ethernet-phy@0 {
157                         reg = <0>;
158                         phy-mode = "rgmii";
159                 };
160
161                 ethernet-phy@1 {
162                         reg = <1>;
163                         phy-mode = "rgmii";
164                 };
165
166                 ethernet-phy@2 {
167                         reg = <2>;
168                         phy-mode = "rgmii";
169                 };
170
171                 ethernet-phy@3 {
172                         reg = <3>;
173                         phy-mode = "rgmii";
174                 };
175
176                 ethernet-phy@4 {
177                         reg = <4>;
178                         phy-mode = "rgmii";
179                 };
180
181                 ethernet-phy@1f {
182                         reg = <0x1f>;
183                         phy-mode = "rgmii";
184                 };
185         };
186 };
187
188 &pinctrl {
189         state_default: pinctrl0 {
190                 gpio {
191                         ralink,group = "i2c", "uartf";
192                         ralink,function = "gpio";
193                 };
194         };
195 };
196
197 &pcie {
198         status = "okay";
199 };
200
201 &pcie0 {
202         wifi@0,0 {
203                 reg = <0x0000 0 0 0 0>;
204                 mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
205                 ieee80211-freq-limit = <5000000 6000000>;
206         };
207 };
208
209 &wmac {
210         ralink,mtd-eeprom = <&factory 0x0>;
211 };