kernel: remove non-existant symbols
[oweals/openwrt.git] / target / linux / ramips / dts / mt7620a_iodata_wn-ac1167gr.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7620a.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10         compatible = "iodata,wn-ac1167gr", "ralink,mt7620a-soc";
11         model = "I-O DATA WN-AC1167GR";
12
13         aliases {
14                 led-boot = &led_power;
15                 led-failsafe = &led_power;
16                 led-running = &led_power;
17                 led-upgrade = &led_power;
18         };
19
20         leds {
21                 compatible = "gpio-leds";
22
23                 led_power: power {
24                         label = "wn-ac1167gr:green:power";
25                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
26                         default-state = "on";
27                 };
28
29                 wlan2g {
30                         label = "wn-ac1167gr:green:wlan2g";
31                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
32                 };
33
34                 notification {
35                         label = "wn-ac1167gr:green:notification";
36                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
37                 };
38
39                 wlan5g {
40                         label = "wn-ac1167gr:green:wlan5g";
41                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
42                 };
43         };
44
45         keys {
46                 compatible = "gpio-keys";
47
48                 wps {
49                         label = "wps";
50                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
51                         linux,code = <KEY_WPS_BUTTON>;
52                 };
53
54                 reset {
55                         label = "reset";
56                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
57                         linux,code = <KEY_RESTART>;
58                 };
59
60                 auto {
61                         label = "auto";
62                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
63                         linux,code = <BTN_0>;
64                         linux,input-type = <EV_SW>;
65                 };
66         };
67 };
68
69 &spi0 {
70         status = "okay";
71
72         flash@0 {
73                 compatible = "jedec,spi-nor";
74                 reg = <0>;
75                 spi-max-frequency = <10000000>;
76
77                 partitions {
78                         compatible = "fixed-partitions";
79                         #address-cells = <1>;
80                         #size-cells = <1>;
81
82                         partition@0 {
83                                 label = "u-boot";
84                                 reg = <0x0 0x30000>;
85                                 read-only;
86                         };
87
88                         partition@30000 {
89                                 label = "u-boot-env";
90                                 reg = <0x30000 0x10000>;
91                                 read-only;
92                         };
93
94                         factory: partition@40000 {
95                                 label = "factory";
96                                 reg = <0x40000 0x8000>;
97                                 read-only;
98                         };
99
100                         iNIC_rf: partition@48000 {
101                                 label = "iNIC_rf";
102                                 reg = <0x48000 0x8000>;
103                                 read-only;
104                         };
105
106                         partition@50000 {
107                                 label = "NoUsed";
108                                 reg = <0x50000 0x20000>;
109                                 read-only;
110                         };
111
112                         partition@70000 {
113                                 compatible = "denx,uimage";
114                                 label = "firmware";
115                                 reg = <0x70000 0x6b4000>;
116                         };
117
118                         partition@724000 {
119                                 label = "manufacture";
120                                 reg = <0x724000 0x8c000>;
121                                 read-only;
122                         };
123
124                         partition@7b0000 {
125                                 label = "backup";
126                                 reg = <0x7b0000 0x10000>;
127                                 read-only;
128                         };
129
130                         partition@7c0000 {
131                                 label = "storage";
132                                 reg = <0x7c0000 0x40000>;
133                                 read-only;
134                         };
135                 };
136         };
137 };
138
139 &ethernet {
140         pinctrl-names = "default";
141         pinctrl-0 = <&rgmii1_pins &mdio_pins>;
142         mtd-mac-address = <&factory 0x4>;
143
144         port@5 {
145                 status = "okay";
146                 mediatek,fixed-link = <1000 1 1 1>;
147                 phy-mode = "rgmii";
148         };
149
150         mdio-bus {
151                 #address-cells = <1>;
152                 #size-cells = <0>;
153                 status = "okay";
154
155                 ethernet-phy@0 {
156                         reg = <0>;
157                         phy-mode = "rgmii";
158                 };
159
160                 ethernet-phy@1 {
161                         reg = <1>;
162                         phy-mode = "rgmii";
163                 };
164
165                 ethernet-phy@2 {
166                         reg = <2>;
167                         phy-mode = "rgmii";
168                 };
169
170                 ethernet-phy@3 {
171                         reg = <3>;
172                         phy-mode = "rgmii";
173                 };
174
175                 ethernet-phy@4 {
176                         reg = <4>;
177                         phy-mode = "rgmii";
178                 };
179
180                 ethernet-phy@1f {
181                         reg = <0x1f>;
182                         phy-mode = "rgmii";
183                 };
184         };
185 };
186
187 &state_default {
188         gpio {
189                 groups = "i2c", "uartf";
190                 function = "gpio";
191         };
192 };
193
194 &pcie {
195         status = "okay";
196 };
197
198 &pcie0 {
199         wifi@0,0 {
200                 reg = <0x0000 0 0 0 0>;
201                 mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
202                 ieee80211-freq-limit = <5000000 6000000>;
203         };
204 };
205
206 &wmac {
207         ralink,mtd-eeprom = <&factory 0x0>;
208 };