target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a_hiwifi_hc5x61.dtsi"
   4
   5 / {
   6         compatible = "hiwifi,hc5861", "hiwifi,hc5x61", "ralink,mt7620a-soc";
   7         model = "HiWiFi HC5861";
   8
   9         aliases {
  10                 led-boot = &led_system;
  11                 led-failsafe = &led_system;
  12                 led-running = &led_system;
  13                 led-upgrade = &led_system;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_system: system {
  20                         label = "hc5861:blue:system";
  21                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 wlan2g {
  25                         label = "hc5861:blue:wlan2g";
  26                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 internet {
  30                         label = "hc5861:blue:internet";
  31                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 wlan5g {
  35                         label = "hc5861:blue:wlan5g";
  36                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 turbo {
  40                         label = "hc5861:blue:turbo";
  41                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  42                 };
  43         };
  44
  45         gpio_export {
  46                 compatible = "gpio-export";
  47                 #size-cells = <0>;
  48
  49                 usbpower {
  50                         gpio-export,name = "usbpower";
  51                         gpio-export,output = <0>;
  52                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 sdpower {
  56                         gpio-export,name = "sdpower";
  57                         gpio-export,output = <0>;
  58                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  59                 };
  60         };
  61 };
  62
  63 &ehci {
  64         status = "okay";
  65 };
  66
  67 &ohci {
  68         status = "okay";
  69 };
  70
  71 &ethernet {
  72         status = "okay";
  73         mtd-mac-address = <&factory 0x4>;
  74         pinctrl-names = "default";
  75         pinctrl-0 = <&rgmii1_pins &mdio_pins>;
  76         mediatek,portmap = "wllll";
  77
  78         port@5 {
  79                 status = "okay";
  80                 phy-handle = <&phy5>;
  81                 phy-mode = "rgmii";
  82         };
  83
  84         mdio-bus {
  85                 status = "okay";
  86
  87                 phy5: ethernet-phy@5 {
  88                         reg = <5>;
  89                         phy-mode = "rgmii";
  90                 };
  91         };
  92 };
  93
  94 &pcie {
  95         status = "okay";
  96 };
  97
  98 &pcie0 {
  99         wifi@0,0 {
 100                 compatible = "pci14c3,7662";
 101                 reg = <0x0000 0 0 0 0>;
 102                 mediatek,mtd-eeprom = <&factory 0x8000>;
 103                 ieee80211-freq-limit = <5000000 6000000>;
 104         };
 105 };