target/linux/ramips/dts/mt7620a_dlink_dwr-960.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7620a.dtsi"
   5
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/gpio/gpio.h>
   8
   9 / {
  10         compatible = "dlink,dwr-960", "ralink,mt7620a-soc";
  11         model = "D-Link DWR-960";
  12
  13         aliases {
  14                 led-boot = &led_status;
  15                 led-failsafe = &led_status;
  16                 led-running = &led_status;
  17                 led-upgrade = &led_status;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28
  29                 wps {
  30                         label = "wps";
  31                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 led_status: status {
  40                         label = "dwr-960:green:status";
  41                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 wan {
  45                         label = "dwr-960:green:wan";
  46                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 lan {
  50                         label = "dwr-960:green:lan";
  51                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 sms {
  55                         label = "dwr-960:green:sms";
  56                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 signal_green {
  60                         label = "dwr-960:green:signal";
  61                         gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
  62                 };
  63
  64                 signal_red {
  65                         label = "dwr-960:red:signal";
  66                         gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
  67                 };
  68
  69                 4g {
  70                         label = "dwr-960:green:4g";
  71                         gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 3g {
  75                         label = "dwr-960:green:3g";
  76                         gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
  77                 };
  78
  79                 wlan5g {
  80                         label = "dwr-960:green:wlan5g";
  81                         gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
  82                         linux,default-trigger = "phy0tpt";
  83                 };
  84
  85                 wlan2g {
  86                         label = "dwr-960:green:wlan2g";
  87                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  88                         linux,default-trigger = "phy1tpt";
  89                 };
  90         };
  91 };
  92
  93 &ethernet {
  94         status = "okay";
  95
  96         pinctrl-names = "default";
  97         pinctrl-0 = <&rgmii2_pins &mdio_pins>;
  98         mediatek,portmap = "wllll";
  99
 100         port@5 {
 101                 status = "okay";
 102                 phy-mode = "rgmii-txid";
 103                 phy-handle = <&phy7>;
 104         };
 105
 106         mdio-bus {
 107                 status = "okay";
 108
 109                 phy7: ethernet-phy@7 {
 110                         reg = <7>;
 111                         phy-mode = "rgmii-id";
 112                 };
 113         };
 114 };
 115
 116 &gpio1 {
 117         status = "okay";
 118 };
 119
 120 &gpio2 {
 121         status = "okay";
 122 };
 123
 124 &gpio3 {
 125         status = "okay";
 126 };
 127
 128 &spi0 {
 129         status = "okay";
 130
 131         flash@0 {
 132                 compatible = "jedec,spi-nor";
 133                 reg = <0>;
 134                 spi-max-frequency = <50000000>;
 135
 136                 partitions {
 137                         compatible = "fixed-partitions";
 138                         #address-cells = <1>;
 139                         #size-cells = <1>;
 140
 141                         partition@0 {
 142                                 label = "jboot";
 143                                 reg = <0x0 0x10000>;
 144                                 read-only;
 145                         };
 146
 147                         partition@10000 {
 148                                 compatible = "amit,jimage";
 149                                 label = "firmware";
 150                                 reg = <0x10000 0xfe0000>;
 151                         };
 152
 153                         config: partition@ff0000 {
 154                                 label = "config";
 155                                 reg = <0xff0000 0x10000>;
 156                                 read-only;
 157                         };
 158                 };
 159         };
 160 };
 161
 162 &ehci {
 163         status = "okay";
 164 };
 165
 166 &ohci {
 167         status = "okay";
 168 };
 169
 170 &pcie {
 171         status = "okay";
 172 };
 173
 174 &pcie0 {
 175         wifi@0,0 {
 176                 compatible = "mediatek,mt76";
 177                 reg = <0x0000 0 0 0 0>;
 178                 ieee80211-freq-limit = <5000000 6000000>;
 179                 mediatek,mtd-eeprom = <&config 0xe08e>;
 180                 mtd-mac-address = <&config 0xe50e>;
 181                 mtd-mac-address-increment = <2>;
 182         };
 183 };
 184
 185 &state_default {
 186         default {
 187                 ralink,group = "i2c", "wled", "spi refclk", "uartf", "ephy";
 188                 ralink,function = "gpio";
 189         };
 190 };