1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include "mt7620a.dtsi"
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
10 compatible = "dlink,dwr-118-a1", "ralink,mt7620a-soc";
11 model = "D-Link DWR-118 A1";
14 led-boot = &led_internet;
15 led-failsafe = &led_internet;
16 led-upgrade = &led_internet;
20 compatible = "gpio-keys";
24 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
25 linux,code = <KEY_WPS_BUTTON>;
30 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
31 linux,code = <KEY_RESTART>;
36 compatible = "gpio-leds";
39 label = "dwr-118-a1:green:wan";
40 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
43 led_internet: internet {
44 label = "dwr-118-a1:green:internet";
45 gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
49 label = "dwr-118-a1:green:lan";
50 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
54 label = "dwr-118-a1:green:wlan2g";
55 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
59 label = "dwr-118-a1:green:usb";
60 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
61 trigger-sources = <&ohci_port1>, <&ehci_port1>;
62 linux,default-trigger = "usbport";
67 compatible = "gpio-export";
71 gpio-export,name = "usb";
72 gpio-export,output = <0>;
73 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
94 compatible = "jedec,spi-nor";
96 spi-max-frequency = <80000000>;
99 compatible = "fixed-partitions";
100 #address-cells = <1>;
110 compatible = "amit,jimage";
112 reg = <0x10000 0xfe0000>;
115 config: partition@ff0000 {
117 reg = <0xff0000 0x10000>;
134 groups = "ephy", "uartf", "spi refclk", "wled";
145 reg = <0x0000 0 0 0 0>;
146 mtd-mac-address = <&config 0xe496>;
147 mtd-mac-address-increment = <(2)>;
148 mediatek,mtd-eeprom = <&config 0xe083>;
158 pinctrl-names = "default";
159 pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
163 phy-handle = <&phy4>;
169 phy-handle = <&phy5>;
176 phy4: ethernet-phy@4 {
178 phy-mode = "rgmii-rxid";
181 phy5: ethernet-phy@5 {
183 phy-mode = "rgmii-rxid";
189 mediatek,port4 = "gmac";