target/linux/ramips/dts/mt7620a_dlink_dwr-118-a1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7620a.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "dlink,dwr-118-a1", "ralink,mt7620a-soc";
  11         model = "D-Link DWR-118 A1";
  12
  13         aliases {
  14                 led-boot = &led_internet;
  15                 led-failsafe = &led_internet;
  16                 led-upgrade = &led_internet;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys";
  21
  22                 wps {
  23                         label = "wps";
  24                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  25                         linux,code = <KEY_WPS_BUTTON>;
  26                 };
  27
  28                 reset {
  29                         label = "reset";
  30                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  31                         linux,code = <KEY_RESTART>;
  32                 };
  33         };
  34
  35         leds {
  36                 compatible = "gpio-leds";
  37
  38                 wan {
  39                         label = "dwr-118-a1:green:wan";
  40                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 led_internet: internet {
  44                         label = "dwr-118-a1:green:internet";
  45                         gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 lan {
  49                         label = "dwr-118-a1:green:lan";
  50                         gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 wlan2g {
  54                         label = "dwr-118-a1:green:wlan2g";
  55                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 usb {
  59                         label = "dwr-118-a1:green:usb";
  60                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  61                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  62                         linux,default-trigger = "usbport";
  63                 };
  64         };
  65
  66         gpio_export {
  67                 compatible = "gpio-export";
  68                 #size-cells = <0>;
  69
  70                 usb {
  71                         gpio-export,name = "usb";
  72                         gpio-export,output = <0>;
  73                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  74                 };
  75         };
  76 };
  77
  78 &gpio1 {
  79         status = "okay";
  80 };
  81
  82 &gpio2 {
  83         status = "okay";
  84 };
  85
  86 &gpio3 {
  87         status = "okay";
  88 };
  89
  90 &spi0 {
  91         status = "okay";
  92
  93         flash@0 {
  94                 compatible = "jedec,spi-nor";
  95                 reg = <0>;
  96                 spi-max-frequency = <80000000>;
  97
  98                 partitions {
  99                         compatible = "fixed-partitions";
 100                         #address-cells = <1>;
 101                         #size-cells = <1>;
 102
 103                         partition@0 {
 104                                 label = "jboot";
 105                                 reg = <0x0 0x10000>;
 106                                 read-only;
 107                         };
 108
 109                         partition@10000 {
 110                                 compatible = "amit,jimage";
 111                                 label = "firmware";
 112                                 reg = <0x10000 0xfe0000>;
 113                         };
 114
 115                         config: partition@ff0000 {
 116                                 label = "config";
 117                                 reg = <0xff0000 0x10000>;
 118                                 read-only;
 119                         };
 120                 };
 121         };
 122 };
 123
 124 &ehci {
 125         status = "okay";
 126 };
 127
 128 &ohci {
 129         status = "okay";
 130 };
 131
 132 &state_default {
 133         default {
 134                 groups = "ephy", "uartf", "spi refclk", "wled";
 135                 function = "gpio";
 136         };
 137 };
 138
 139 &pcie {
 140         status = "okay";
 141 };
 142
 143 &pcie0 {
 144         wifi@0,0 {
 145                 reg = <0x0000 0 0 0 0>;
 146                 mtd-mac-address = <&config 0xe496>;
 147                 mtd-mac-address-increment = <(2)>;
 148                 mediatek,mtd-eeprom = <&config 0xe083>;
 149
 150                 led {
 151                         led-sources = <0>;
 152                         led-active-low;
 153                 };
 154         };
 155 };
 156
 157 &ethernet {
 158         status = "okay";
 159         pinctrl-names = "default";
 160         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
 161
 162         port@4 {
 163                 status = "okay";
 164                 phy-handle = <&phy4>;
 165                 phy-mode = "rgmii";
 166         };
 167
 168         port@5 {
 169                 status = "okay";
 170                 phy-handle = <&phy5>;
 171                 phy-mode = "rgmii";
 172         };
 173
 174         mdio-bus {
 175                 status = "okay";
 176
 177                 phy4: ethernet-phy@4 {
 178                         reg = <4>;
 179                         phy-mode = "rgmii-rxid";
 180                 };
 181
 182                 phy5: ethernet-phy@5 {
 183                         reg = <5>;
 184                         phy-mode = "rgmii-rxid";
 185                 };
 186         };
 187 };
 188
 189 &gsw {
 190         mediatek,port4 = "gmac";
 191 };