target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
  10         model = "D-Link DIR-810L";
  11
  12         aliases {
  13                 led-boot = &led_power_green;
  14                 led-failsafe = &led_power_green;
  15                 led-running = &led_power_green;
  16                 led-upgrade = &led_power_green;
  17                 label-mac-device = &ethernet;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys-polled";
  22                 poll-interval = <20>;
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  27                         linux,code = <BTN_0>;
  28                 };
  29
  30                 wps {
  31                         label = "wps";
  32                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  33                         linux,code = <BTN_0>;
  34                 };
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39
  40                 led_power_green: power {
  41                         label = "dir-810l:green:power";
  42                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  43                 };
  44
  45                 wan {
  46                         label = "dir-810l:orange:wan";
  47                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  48                 };
  49
  50                 power2 {
  51                         label = "dir-810l:orange:power";
  52                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  53                 };
  54         };
  55 };
  56
  57 &spi0 {
  58         status = "okay";
  59
  60         m25p80@0 {
  61                 compatible = "jedec,spi-nor";
  62                 reg = <0>;
  63                 spi-max-frequency = <10000000>;
  64
  65                 partitions {
  66                         compatible = "fixed-partitions";
  67                         #address-cells = <1>;
  68                         #size-cells = <1>;
  69
  70                         partition@0 {
  71                                 label = "u-boot";
  72                                 reg = <0x0 0x30000>;
  73                                 read-only;
  74                         };
  75
  76                         partition@30000 {
  77                                 label = "u-boot-env";
  78                                 reg = <0x30000 0x10000>;
  79                                 read-only;
  80                         };
  81
  82                         factory: partition@40000 {
  83                                 label = "factory";
  84                                 reg = <0x40000 0x10000>;
  85                                 read-only;
  86                         };
  87
  88                         factory5g: partition@50000 {
  89                                 label = "factory5g";
  90                                 reg = <0x50000 0x10000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@60000 {
  95                                 label = "Wolf_Config";
  96                                 reg = <0x60000 0x10000>;
  97                                 read-only;
  98                         };
  99
 100                         partition@70000 {
 101                                 label = "MyDlink";
 102                                 reg = <0x70000 0x80000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@e0000 {
 107                                 label = "Jffs2";
 108                                 reg = <0xe0000 0x80000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@170000 {
 113                                 compatible = "denx,uimage";
 114                                 label = "firmware";
 115                                 reg = <0x170000 0x690000>;
 116                         };
 117                 };
 118         };
 119 };
 120
 121 &pinctrl {
 122         state_default: pinctrl0 {
 123                 gpio {
 124                         ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
 125                         ralink,function = "gpio";
 126                 };
 127         };
 128 };
 129
 130 &ethernet {
 131         mtd-mac-address = <&factory 0x28>;
 132         mediatek,portmap = "llllw";
 133 };
 134
 135 &gsw {
 136         mediatek,port4 = "ephy";
 137         pinctrl-names = "default";
 138         pinctrl-0 = <&ephy_pins>;
 139 };
 140
 141 &pcie {
 142         status = "okay";
 143 };
 144
 145 &wmac {
 146         ralink,mtd-eeprom = <&factory 0>;
 147         pinctrl-names = "default";
 148         pinctrl-0 = <&pa_pins>;
 149 };
 150
 151 &pcie0 {
 152         wifi@0,0 {
 153                 reg = <0x0000 0 0 0 0>;
 154                 mediatek,mtd-eeprom = <&factory 0x8000>;
 155                 ieee80211-freq-limit = <5000000 6000000>;
 156         };
 157 };