ramips: add support for TP-Link RE200 v1
[oweals/openwrt.git] / target / linux / ramips / dts / mt7620a_asus_rp-n53.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "asus,rp-n53", "ralink,mt7620a-soc";
10         model = "Asus RP-N53";
11
12         keys {
13                 compatible = "gpio-keys";
14
15                 touch {
16                         label = "touch";
17                         gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
18                         linux,code = <BTN_0>;
19                 };
20
21                 wps {
22                         label = "wps";
23                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
24                         linux,code = <BTN_0>;
25                 };
26
27                 reset {
28                         label = "reset";
29                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
30                         linux,code = <BTN_0>;
31                 };
32
33                 audio {
34                         label = "audio";
35                         gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
36                         linux,code = <BTN_1>;
37                 };
38         };
39
40         leds {
41                 compatible = "gpio-leds";
42
43                 backlight {
44                         label = "rp-n53:white:back";
45                         gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
46                 };
47
48                 wifi0 {
49                         label = "rp-n53:blue:5g3";
50                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
51                 };
52
53                 wifi1 {
54                         label = "rp-n53:blue:5g2";
55                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
56                 };
57
58                 wifi2 {
59                         label = "rp-n53:blue:5g1";
60                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
61                 };
62
63                 wifi3 {
64                         label = "rp-n53:blue:wifi";
65                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
66                 };
67
68                 wifi4 {
69                         label = "rp-n53:blue:2g1";
70                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
71                 };
72
73                 wifi5 {
74                         label = "rp-n53:blue:2g2";
75                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
76                 };
77
78                 wifi6 {
79                         label = "rp-n53:blue:2g3";
80                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
81                 };
82         };
83 };
84
85 &gpio1 {
86         status = "okay";
87 };
88
89 &i2c {
90         status = "okay";
91 };
92
93 &i2s {
94         status = "okay";
95         pinctrl-names = "default";
96         pinctrl-0 = <&pcm_i2s_pins>;
97 };
98
99 &spi0 {
100         status = "okay";
101
102         m25p80@0 {
103                 compatible = "jedec,spi-nor";
104                 reg = <0>;
105                 spi-max-frequency = <10000000>;
106
107                 partitions {
108                         compatible = "fixed-partitions";
109                         #address-cells = <1>;
110                         #size-cells = <1>;
111
112                         partition@0 {
113                                 label = "u-boot";
114                                 reg = <0x0 0x30000>;
115                                 read-only;
116                         };
117
118                         partition@30000 {
119                                 label = "u-boot-env";
120                                 reg = <0x30000 0x10000>;
121                                 read-only;
122                         };
123
124                         factory: partition@40000 {
125                                 label = "factory";
126                                 reg = <0x40000 0x10000>;
127                                 read-only;
128                         };
129
130                         partition@50000 {
131                                 compatible = "denx,uimage";
132                                 label = "firmware";
133                                 reg = <0x50000 0x7b0000>;
134                         };
135                 };
136         };
137 };
138
139 &pcm {
140         status = "okay";
141 };
142
143 &gdma {
144         status = "okay";
145 };
146
147 &wmac {
148         ralink,mtd-eeprom = <&factory 0>;
149 };
150
151 &state_default {
152         gpio {
153                 ralink,group = "mdio", "rgmii1";
154                 ralink,function = "gpio";
155         };
156 };
157
158 &gsw {
159         mediatek,port4 = "ephy";
160         pinctrl-names = "default";
161         pinctrl-0 = <&ephy_pins>;
162 };
163
164 &pcie {
165         status = "okay";
166 };
167
168 &pcie0 {
169         wifi@0,0 {
170                 compatible = "pci1814,5592";
171                 reg = <0x0000 0 0 0 0>;
172                 ralink,2ghz = <0>;
173                 ralink,mtd-eeprom = <&factory 0x8000>;
174         };
175 };