target/linux/ramips/dts/ki_rb.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "zyxel,keenetic-extra-ii", "mediatek,mt7628an-soc";
  10         model = "ZyXEL Keenetic Extra II";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21                 reg = <0x0 0x8000000>;
  22         };
  23
  24         chosen {
  25                 bootargs = "console=ttyS0,57600n8";
  26         };
  27
  28         keys {
  29                 compatible = "gpio-keys-polled";
  30                 poll-interval = <20>;
  31
  32                 reset {
  33                         label = "reset";
  34                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37
  38                 wps {
  39                         label = "wps";
  40                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  41                         linux,code = <KEY_WPS_BUTTON>;
  42                 };
  43
  44                 fn {
  45                         label = "fn";
  46                         gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
  47                         linux,code = <BTN_0>;
  48                 };
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53
  54                 led_power: power {
  55                         label = "keenetic-extra-ii:green:power";
  56                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  57                         default-state = "keep";
  58                 };
  59
  60                 internet {
  61                         label = "keenetic-extra-ii:green:internet";
  62                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 wifi {
  66                         label = "keenetic-extra-ii:green:wifi";
  67                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 usb {
  71                         label = "keenetic-extra-ii:green:usb";
  72                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  73                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  74                         linux,default-trigger = "usbport";
  75                 };
  76         };
  77
  78         gpio_export {
  79                 compatible = "gpio-export";
  80                 #size-cells = <0>;
  81
  82                 usbpower {
  83                         gpio-export,name = "usbpower";
  84                         gpio-export,output = <1>;
  85                         gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
  86                 };
  87         };
  88 };
  89
  90 &spi0 {
  91         status = "okay";
  92
  93         m25p80@0 {
  94                 compatible = "jedec,spi-nor";
  95                 reg = <0>;
  96                 spi-max-frequency = <10000000>;
  97
  98                 partitions {
  99                         compatible = "fixed-partitions";
 100                         #address-cells = <1>;
 101                         #size-cells = <1>;
 102
 103                         partition@0 {
 104                                 label = "u-boot";
 105                                 reg = <0x0 0x30000>;
 106                                 read-only;
 107                         };
 108
 109                         partition@30000 {
 110                                 label = "u-config";
 111                                 reg = <0x30000 0x10000>;
 112                                 read-only;
 113                         };
 114
 115                         factory: partition@40000 {
 116                                 label = "rf-eeprom";
 117                                 reg = <0x40000 0x10000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@50000 {
 122                                 compatible = "denx,uimage";
 123                                 label = "firmware";
 124                                 reg = <0x50000 0xe90000>;
 125                         };
 126
 127                         partition@ee0000 {
 128                                 label = "config_1";
 129                                 reg = <0xee0000 0x10000>;
 130                                 read-only;
 131                         };
 132
 133                         partition@ef0000 {
 134                                 label = "storage";
 135                                 reg = <0xef0000 0x100000>;
 136                                 read-only;
 137                         };
 138
 139                         partition@ff0000 {
 140                                 label = "dump";
 141                                 reg = <0xff0000 0x10000>;
 142                                 read-only;
 143                         };
 144
 145                         partition@1000000 {
 146                                 label = "u-state";
 147                                 reg = <0x1000000 0x30000>;
 148                                 read-only;
 149                         };
 150
 151                         partition@1030000 {
 152                                 label = "u-config_res";
 153                                 reg = <0x1030000 0x10000>;
 154                                 read-only;
 155                         };
 156
 157                         partition@1040000 {
 158                                 label = "rf-eeprom_res";
 159                                 reg = <0x1040000 0x10000>;
 160                                 read-only;
 161                         };
 162
 163                         partition@1050000 {
 164                                 label = "firmware_2";
 165                                 reg = <0x1050000 0xe90000>;
 166                                 read-only;
 167                         };
 168
 169                         partition@1ee0000 {
 170                                 label = "config_2";
 171                                 reg = <0x1ee0000 0x10000>;
 172                                 read-only;
 173                         };
 174                 };
 175         };
 176 };
 177
 178 &ehci {
 179         status = "okay";
 180 };
 181
 182 &ohci {
 183         status = "okay";
 184 };
 185
 186 &ethernet {
 187         mtd-mac-address = <&factory 0x4>;
 188         mediatek,portmap = "wllll";
 189 };
 190
 191 &wmac {
 192         status = "okay";
 193         mediatek,mtd-eeprom = <&factory 0x0>;
 194 };
 195
 196 &pcie {
 197         status = "okay";
 198 };
 199
 200 &pcie0 {
 201         mt76@0,0 {
 202                 reg = <0x0000 0 0 0 0>;
 203                 mediatek,mtd-eeprom = <&factory 0x8000>;
 204                 ieee80211-freq-limit = <5000000 6000000>;
 205                 mtd-mac-address = <&factory 0x8004>;
 206         };
 207 };
 208
 209 &pinctrl {
 210         state_default: pinctrl0 {
 211                 gpio {
 212                         ralink,group = "gpio", "i2s", "refclk", "spi cs1", "uart1", "wled_an";
 213                         ralink,function = "gpio";
 214                 };
 215         };
 216 };