target/linux/ramips/dts/ZBT-WE1226.dts

   1 /dts-v1/;
   2 #include <dt-bindings/input/input.h>
   3 #include <dt-bindings/gpio/gpio.h>
   4
   5 #include "mt7628an.dtsi"
   6
   7 / {
   8         compatible = "zbtlink,zbt-we1226", "mediatek,mt7628an-soc";
   9         model = "Zbtlink ZBT-WE1226";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,115200";
  13         };
  14
  15         memory@0 {
  16                 device_type = "memory";
  17                 reg = <0x0 0x4000000>;
  18         };
  19
  20         gpio-keys-polled {
  21                 compatible = "gpio-keys-polled";
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24                 poll-interval = <20>;
  25
  26                 reset {
  27                         label = "reset";
  28                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  29                         linux,code = <KEY_RESTART>;
  30                 };
  31         };
  32
  33         gpio-leds {
  34                 compatible = "gpio-leds";
  35
  36                 wan {
  37                         label = "zbt-we1226:green:wan";
  38                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 lan1 {
  42                         label = "zbt-we1226:green:lan1";
  43                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 lan2 {
  47                         label = "zbt-we1226:green:lan2";
  48                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 wlan {
  52                         label = "zbt-we1226:green:wlan";
  53                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56 };
  57
  58 &pinctrl {
  59         state_default: pinctrl0 {
  60                 gpio {
  61                         ralink,group = "p0led_an", "p1led_an", "p4led_an", "wdt", "wled_an";
  62                         ralink,function = "gpio";
  63                 };
  64         };
  65 };
  66
  67 &spi0 {
  68         status = "okay";
  69
  70         m25p80@0 {
  71                 #address-cells = <1>;
  72                 #size-cells = <1>;
  73                 compatible = "jedec,spi-nor";
  74                 reg = <0>;
  75                 spi-max-frequency = <10000000>;
  76                 m25p,chunked-io = <32>;
  77
  78                 partition@0 {
  79                         label = "u-boot";
  80                         reg = <0x0 0x30000>;
  81                         read-only;
  82                 };
  83
  84                 partition@30000 {
  85                         label = "u-boot-env";
  86                         reg = <0x30000 0x10000>;
  87                         read-only;
  88                 };
  89
  90                 factory: partition@40000 {
  91                         label = "factory";
  92                         reg = <0x40000 0x10000>;
  93                         read-only;
  94                 };
  95
  96                 partition@50000 {
  97                         label = "firmware";
  98                         reg = <0x50000 0x7b0000>;
  99                 };
 100         };
 101 };
 102
 103 &wmac {
 104         status = "okay";
 105         ralink,mtd-eeprom = <&factory 0x4>;
 106 };
 107
 108 &ethernet {
 109         mtd-mac-address = <&factory 0x2e>;
 110         mediatek,portmap = "llllw";
 111 };