ramips: disable NAND device in mt7621.dtsi to fix boot errors on many devices
[oweals/openwrt.git] / target / linux / ramips / dts / WSR-1166.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 / {
6         compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
7         model = "Buffalo WSR-1166DHP";
8
9         memory@0 {
10                 device_type = "memory";
11                 reg = <0x0 0x8000000>;
12         };
13
14         chosen {
15                 bootargs = "console=ttyS0,57600";
16         };
17
18         palmbus@1E000000 {
19                 spi@b00 {
20                         status = "okay";
21
22                         m25p80@0 {
23                                 #address-cells = <1>;
24                                 #size-cells = <1>;
25                                 compatible = "jedec,spi-nor";
26                                 reg = <0 0>;
27                                 linux,modalias = "m25p80";
28                                 spi-max-frequency = <10000000>;
29
30                                 partition@0 {
31                                         label = "u-boot";
32                                         reg = <0x0 0x30000>;
33                                         read-only;
34                                 };
35
36                                 partition@30000 {
37                                         label = "u-boot-env";
38                                         reg = <0x30000 0x10000>;
39                                         read-only;
40                                 };
41
42                                 factory: partition@40000 {
43                                         label = "factory";
44                                         reg = <0x40000 0x10000>;
45                                         read-only;
46                                 };
47
48                                 partition@50000 {
49                                         label = "firmware";
50                                         reg = <0x50000 0xf90000>;
51                                 };
52
53                                 partition@fe00000 {
54                                         label = "board_data";
55                                         reg = <0xfe0000 0x10000>;
56                                 };
57                         };
58                 };
59         };
60
61         pinctrl {
62                 state_default: pinctrl0 {
63                         gpio {
64                                 ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
65                                 ralink,function = "gpio";
66                         };
67                 };
68         };
69
70         gpio-leds {
71                 compatible = "gpio-leds";
72
73                 internet_g {
74                         label = "wsr-1166:green:internet";
75                         gpios = <&gpio1 9 1>;
76                 };
77
78                 router_g {
79                         label = "wsr-1166:green:router";
80                         gpios = <&gpio1 10 1>;
81                 };
82
83                 router_o {
84                         label = "wsr-1166:orange:router";
85                         gpios = <&gpio1 11 1>;
86                 };
87
88                 internet_o {
89                         label = "wsr-1166:orange:internet";
90                         gpios = <&gpio1 12 1>;
91                 };
92
93                 wifi_o {
94                         label = "wsr-1166:orange:wifi";
95                         gpios = <&gpio1 13 1>;
96                 };
97
98                 power {
99                         label = "wsr-1166:green:power";
100                         gpios = <&gpio1 14 1>;
101                 };
102
103                 diag {
104                         label = "wsr-1166:orange:diag";
105                         gpios = <&gpio1 15 1>;
106                 };
107
108                 wifi_g {
109                         label = "wsr-1166:green:wifi";
110                         gpios = <&gpio1 16 1>;
111                 };
112         };
113
114         gpio-keys-polled {
115                 compatible = "gpio-keys-polled";
116                 #address-cells = <1>;
117                 #size-cells = <0>;
118                 poll-interval = <20>;
119
120                 power {
121                         label = "power";
122                         gpios = <&gpio0 18 1>;
123                         linux,code = <0x74>;
124                 };
125
126                 reset {
127                         label = "reset";
128                         gpios = <&gpio0 3 1>;
129                         linux,code = <0x198>;
130                 };
131
132                 aoss {
133                         label = "aoss";
134                         gpios = <&gpio0 6 1>;
135                         linux,code = <0x211>;
136                 };
137
138                 auto {
139                         label = "mode";
140                         gpios = <&gpio0 7 0>;
141                         linux,code = <0x100>;
142                         linux,input-type = <5>; /* EV_SW */
143                 };
144
145                 ap {
146                         label = "ap";
147                         gpios = <&gpio0 10 0>;
148                         linux,code = <0x100>;
149                         linux,input-type = <5>; /* EV_SW */
150                 };
151
152                 router {
153                         label = "router";
154                         gpios = <&gpio0 12 0>;
155                         linux,code = <0x100>;
156                         linux,input-type = <5>; /* EV_SW */
157                 };
158         };
159
160         gpio_poweroff {
161                 compatible = "gpio-poweroff";
162                 gpios = <&gpio0 0 1>;
163         };
164
165         pcie@1e140000 {
166                 status = "okay";
167
168                 pcie0 {
169                         mt76@0,0 {
170                                 reg = <0x0000 0 0 0 0>;
171                                 device_type = "pci";
172                                 mediatek,mtd-eeprom = <&factory 0x8000>;
173                                 mediatek,2ghz = <0>;
174                         };
175                 };
176
177                 pcie1 {
178                         mt76@1,0 {
179                                 reg = <0x0000 0 0 0 0>;
180                                 device_type = "pci";
181                                 mediatek,mtd-eeprom = <&factory 0x0000>;
182                                 mediatek,5ghz = <0>;
183                         };
184                 };
185         };
186 };