target/linux/ramips/dts/WRTNODE.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6
   7 / {
   8         compatible = "wrtnode,wrtnode", "ralink,mt7620n-soc";
   9         model = "WRTNODE";
  10
  11         aliases {
  12                 led-status = &led_indicator;
  13         };
  14
  15         gpio-leds {
  16                 compatible = "gpio-leds";
  17
  18                 led_indicator: indicator {
  19                         label = "wrtnode:blue:indicator";
  20                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  21                 };
  22         };
  23 };
  24
  25 &gpio1 {
  26         status = "okay";
  27 };
  28
  29 &gpio2 {
  30         status = "okay";
  31 };
  32
  33 &gpio3 {
  34         status = "okay";
  35 };
  36
  37 &spi0 {
  38         status = "okay";
  39
  40         m25p80@0 {
  41                 compatible = "jedec,spi-nor";
  42                 reg = <0>;
  43                 spi-max-frequency = <10000000>;
  44
  45                 partitions {
  46                         compatible = "fixed-partitions";
  47                         #address-cells = <1>;
  48                         #size-cells = <1>;
  49
  50                         partition@0 {
  51                                 label = "u-boot";
  52                                 reg = <0x0 0x30000>;
  53                                 read-only;
  54                         };
  55
  56                         partition@30000 {
  57                                 label = "u-boot-env";
  58                                 reg = <0x30000 0x10000>;
  59                                 read-only;
  60                         };
  61
  62                         factory: partition@40000 {
  63                                 label = "factory";
  64                                 reg = <0x40000 0x10000>;
  65                                 read-only;
  66                         };
  67
  68                         partition@50000 {
  69                                 label = "firmware";
  70                                 reg = <0x50000 0xfb0000>;
  71                         };
  72                 };
  73         };
  74 };
  75
  76 &ehci {
  77         status = "okay";
  78 };
  79
  80 &ohci {
  81         status = "okay";
  82 };
  83
  84 &ethernet {
  85         mtd-mac-address = <&factory 0x4>;
  86         mediatek,portmap = "wllll";
  87 };
  88
  89 &wmac {
  90         ralink,mtd-eeprom = <&factory 0>;
  91 };
  92
  93 &pinctrl {
  94         state_default: pinctrl0 {
  95                 default {
  96                         ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
  97                         ralink,function = "gpio";
  98                 };
  99         };
 100 };