ramips: add support for ELECOM WRC-1167GHBK2-S
[oweals/openwrt.git] / target / linux / ramips / dts / WRC-1167GHBK2-S.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "elecom,wrc-1167ghbk2-s", "mediatek,mt7621-soc";
10         model = "ELECOM WRC-1167GHBK2-S";
11
12         memory@0 {
13                 device_type = "memory";
14                 reg = <0x0 0x8000000>;
15         };
16
17         chosen {
18                 bootargs = "console=ttyS0,57600";
19         };
20
21         gpio-leds {
22                 compatible = "gpio-leds";
23
24                 wlan2g {
25                         label = "wrc-1167ghbk2-s:white:wlan2g";
26                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
27                 };
28
29                 wlan5g {
30                         label = "wrc-1167ghbk2-s:white:wlan5g";
31                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
32                 };
33
34                 power_green {
35                         label = "wrc-1167ghbk2-s:green:power";
36                         gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
37                 };
38
39                 power_blue {
40                         label = "wrc-1167ghbk2-s:blue:power";
41                         gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
42                 };
43
44                 wps {
45                         label = "wrc-1167ghbk2-s:red:wps";
46                         gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
47                 };
48
49                 power_red {
50                         label = "wrc-1167ghbk2-s:red:power";
51                         gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
52                 };
53         };
54
55         gpio-keys-polled {
56                 compatible = "gpio-keys-polled";
57                 #address-cells = <1>;
58                 #size-cells = <0>;
59                 poll-interval = <20>;
60
61                 reset {
62                         label = "reset";
63                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
64                         linux,code = <KEY_RESTART>;
65                 };
66
67                 wps {
68                         label = "wps";
69                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
70                         linux,code = <KEY_WPS_BUTTON>;
71                 };
72         };
73 };
74
75 &ethernet {
76         mtd-mac-address = <&factory 0xe000>;
77 };
78
79 &spi0 {
80         status = "okay";
81
82         m25p80@0 {
83                 #address-cells = <1>;
84                 #size-cells = <1>;
85                 compatible = "jedec,spi-nor";
86                 reg = <0>;
87                 spi-max-frequency = <10000000>;
88                 m25p,chunked-io = <32>;
89
90                 partition@0 {
91                         label = "u-boot";
92                         reg = <0x0 0x30000>;
93                         read-only;
94                 };
95
96                 partition@30000 {
97                         label = "u-boot-env";
98                         reg = <0x30000 0x10000>;
99                         read-only;
100                 };
101
102                 factory: partition@40000 {
103                         label = "factory";
104                         reg = <0x40000 0x10000>;
105                         read-only;
106                 };
107
108                 partition@50000 {
109                         label = "firmware";
110                         reg = <0x50000 0xf20000>;
111                 };
112
113                 partition@f70000 {
114                         label = "user_data";
115                         reg = <0xf70000 0x80000>;
116                         read-only;
117                 };
118
119                 partition@ff0000 {
120                         label = "NVRAM";
121                         reg = <0xff0000 0x10000>;
122                         read-only;
123                 };
124         };
125 };
126
127 &pinctrl {
128         state_default: pinctrl0 {
129                 gpio {
130                         ralink,group = "i2c", "uart3", "jtag", "wdt";
131                         ralink,function = "gpio";
132                 };
133         };
134 };
135
136 &pcie {
137         status = "okay";
138         // WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
139         // but it's not supported in OpenWrt.
140 };
141
142 &xhci {
143         status = "disabled";
144 };