target/linux/ramips/dts/WR512-3GN.dtsi

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "unbranded,wr512-3gn", "ralink,rt3052-soc";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 3g {
  13                         label = "wr512-3gn:green:3g";
  14                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  15                 };
  16
  17                 gateway {
  18                         label = "wr512-3gn:green:gateway";
  19                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  20                 };
  21
  22                 ap {
  23                         label = "wr512-3gn:green:ap";
  24                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 wps {
  28                         label = "wr512-3gn:green:wps";
  29                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 station {
  33                         label = "wr512-3gn:green:station";
  34                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  35                 };
  36         };
  37
  38         gpio-keys-polled {
  39                 compatible = "gpio-keys-polled";
  40                 #address-cells = <1>;
  41                 #size-cells = <0>;
  42                 poll-interval = <20>;
  43
  44                 reset_wps {
  45                         label = "reset_wps";
  46                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_RESTART>;
  48                 };
  49
  50                 mode {
  51                         label = "mode";
  52                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  53                         linux,code = <BTN_0>;
  54                 };
  55         };
  56 };
  57
  58 &pinctrl {
  59         state_default: pinctrl0 {
  60                 gpio {
  61                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  62                         ralink,function = "gpio";
  63                 };
  64         };
  65 };
  66
  67 &esw {
  68         mediatek,portmap = <0x2f>;
  69 };
  70
  71 &wmac {
  72         ralink,mtd-eeprom = <&factory 0>;
  73 };
  74
  75 &otg {
  76         status = "okay";
  77 };