5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "youhua,wr1200js", "mediatek,mt7621-soc";
10 model = "YouHua WR1200JS";
13 device_type = "memory";
14 reg = <0x0 0x8000000>;
18 bootargs = "console=ttyS0,115200";
22 compatible = "gpio-leds";
25 label = "wr1200js:blue:internet";
26 gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
30 label = "wr1200js:blue:wps";
31 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
35 label = "wr1200js:blue:usb";
36 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
41 compatible = "gpio-keys-polled";
48 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_RESTART>;
54 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_WPS_BUTTON>;
60 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
61 linux,code = <KEY_RFKILL>;
72 compatible = "jedec,spi-nor";
74 spi-max-frequency = <10000000>;
75 m25p,chunked-io = <32>;
85 reg = <0x30000 0x10000>;
89 factory: partition@40000 {
91 reg = <0x40000 0x10000>;
97 reg = <0x50000 0xfb0000>;
107 reg = <0x0000 0 0 0 0>;
109 mediatek,mtd-eeprom = <&factory 0x0000>;
115 reg = <0x0000 0 0 0 0>;
117 mediatek,mtd-eeprom = <&factory 0x8000>;
118 ieee80211-freq-limit = <5000000 6000000>;
129 mtd-mac-address = <&factory 0xe000>;
133 state_default: pinctrl0 {
135 ralink,group = "i2c", "uart2", "uart3", "wdt";
136 ralink,function = "gpio";