target/linux/ramips/dts/WNCE2001.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "WNCE2001", "ralink,rt3052-soc";
   9         model = "Netgear WNCE2001";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,115200";
  13         };
  14
  15         gpio-leds {
  16                 compatible = "gpio-leds";
  17
  18                 power-green {
  19                         label = "wnce2001:green:power";
  20                         gpios = <&gpio0 8 1>;
  21                 };
  22
  23                 power-red {
  24                         label = "wnce2001:red:power";
  25                         gpios = <&gpio0 9 1>;
  26                 };
  27
  28                 wlan-green {
  29                         label = "wnce2001:green:wlan";
  30                         gpios = <&gpio0 12 0>;
  31                 };
  32
  33                 wlan-red {
  34                         label = "wnce2001:red:wlan";
  35                         gpios = <&gpio0 13 0>;
  36                 };
  37         };
  38
  39         gpio-keys-polled {
  40                 compatible = "gpio-keys-polled";
  41                 #address-cells = <1>;
  42                 #size-cells = <0>;
  43                 poll-interval = <20>;
  44
  45                 reset {
  46                         label = "reset";
  47                         gpios = <&gpio0 10 1>;
  48                         linux,code = <KEY_RESTART>;
  49                 };
  50
  51                 wps {
  52                         label = "wps";
  53                         gpios = <&gpio0 0 1>;
  54                         linux,code = <KEY_WPS_BUTTON>;
  55                 };
  56
  57                 rt {
  58                         label = "rt";
  59                         gpios = <&gpio0 11 1>;
  60                         linux,code = <BTN_0>;
  61                 };
  62
  63                 ap {
  64                         label = "ap";
  65                         gpios = <&gpio0 7 1>;
  66                         linux,code = <BTN_1>;
  67                 };
  68         };
  69 };
  70
  71 &spi0 {
  72         status = "okay";
  73
  74         m25p80@0 {
  75                 #address-cells = <1>;
  76                 #size-cells = <1>;
  77                 compatible = "jedec,spi-nor";
  78                 reg = <0>;
  79                 spi-max-frequency = <10000000>;
  80
  81                 partition@0 {
  82                         label = "u-boot";
  83                         reg = <0x0 0x30000>;
  84                         read-only;
  85                 };
  86
  87                 factory: partition@30000 {
  88                         label = "factory";
  89                         reg = <0x30000 0x10000>;
  90                         read-only;
  91                 };
  92
  93                 partition@40000 {
  94                         label = "config";
  95                         reg = <0x40000 0x20000>;
  96                         read-only;
  97                 };
  98
  99                 partition@60000 {
 100                         label = "language";
 101                         reg = <0x60000 0x30000>;
 102                         read-only;
 103                 };
 104
 105                 partition@90000 {
 106                         label = "pot";
 107                         reg = <0x90000 0x10000>;
 108                         read-only;
 109                 };
 110
 111                 partition@a0000 {
 112                         label = "checksum";
 113                         reg = <0xa0000 0x10000>;
 114                 };
 115
 116                 partition@b0000 {
 117                         label = "firmware";
 118                         reg = <0xb0000 0x350000>;
 119                 };
 120         };
 121 };
 122
 123 &pinctrl {
 124         state_default: pinctrl0 {
 125                 gpio {
 126                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
 127                         ralink,function = "gpio";
 128                 };
 129         };
 130 };
 131
 132 &ethernet {
 133         mtd-mac-address = <&factory 0x28>;
 134 };
 135
 136 &wmac {
 137         ralink,mtd-eeprom = <&factory 0>;
 138 };