target/linux/ramips/dts/WNCE2001.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netgear,wnce2001", "ralink,rt3052-soc";
  10         model = "Netgear WNCE2001";
  11
  12         aliases {
  13                 led-status = &led_power_green;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_power_green: power-green {
  24                         label = "wnce2001:green:power";
  25                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 power-red {
  29                         label = "wnce2001:red:power";
  30                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 wlan-green {
  34                         label = "wnce2001:green:wlan";
  35                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  36                 };
  37
  38                 wlan-red {
  39                         label = "wnce2001:red:wlan";
  40                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  41                 };
  42         };
  43
  44         gpio-keys-polled {
  45                 compatible = "gpio-keys-polled";
  46                 poll-interval = <20>;
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_RESTART>;
  52                 };
  53
  54                 wps {
  55                         label = "wps";
  56                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  57                         linux,code = <KEY_WPS_BUTTON>;
  58                 };
  59
  60                 rt {
  61                         label = "rt";
  62                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  63                         linux,code = <BTN_0>;
  64                 };
  65
  66                 ap {
  67                         label = "ap";
  68                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  69                         linux,code = <BTN_1>;
  70                 };
  71         };
  72 };
  73
  74 &spi0 {
  75         status = "okay";
  76
  77         m25p80@0 {
  78                 compatible = "jedec,spi-nor";
  79                 reg = <0>;
  80                 spi-max-frequency = <10000000>;
  81
  82                 partitions {
  83                         compatible = "fixed-partitions";
  84                         #address-cells = <1>;
  85                         #size-cells = <1>;
  86
  87                         partition@0 {
  88                                 label = "u-boot";
  89                                 reg = <0x0 0x30000>;
  90                                 read-only;
  91                         };
  92
  93                         factory: partition@30000 {
  94                                 label = "factory";
  95                                 reg = <0x30000 0x10000>;
  96                                 read-only;
  97                         };
  98
  99                         partition@40000 {
 100                                 label = "config";
 101                                 reg = <0x40000 0x20000>;
 102                                 read-only;
 103                         };
 104
 105                         partition@60000 {
 106                                 label = "language";
 107                                 reg = <0x60000 0x30000>;
 108                                 read-only;
 109                         };
 110
 111                         partition@90000 {
 112                                 label = "pot";
 113                                 reg = <0x90000 0x10000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@a0000 {
 118                                 label = "checksum";
 119                                 reg = <0xa0000 0x10000>;
 120                         };
 121
 122                         partition@b0000 {
 123                                 label = "firmware";
 124                                 reg = <0xb0000 0x350000>;
 125                         };
 126                 };
 127         };
 128 };
 129
 130 &pinctrl {
 131         state_default: pinctrl0 {
 132                 gpio {
 133                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
 134                         ralink,function = "gpio";
 135                 };
 136         };
 137 };
 138
 139 &ethernet {
 140         mtd-mac-address = <&factory 0x28>;
 141 };
 142
 143 &wmac {
 144         ralink,mtd-eeprom = <&factory 0>;
 145 };