target/linux/ramips/dts/WN3000RPV3.dts

   1 /* This file is released into the public domain */
   2
   3 /dts-v1/;
   4
   5 #include "mt7620a.dtsi"
   6
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/gpio/gpio.h>
   9
  10 / {
  11         compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc";
  12         model = "Netgear WN3000RPv3";
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600";
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21                 power_g {
  22                         label = "wn3000rpv3:green:power";
  23                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  24                         default-state = "on";
  25                 };
  26
  27                 power_r {
  28                         label = "wn3000rpv3:red:power";
  29                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 client_g {
  33                         label = "wn3000rpv3:green:client";
  34                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 client_r {
  38                         label = "wn3000rpv3:red:client";
  39                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 router_g {
  43                         label = "wn3000rpv3:green:router";
  44                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 router_r {
  48                         label = "wn3000rpv3:red:router";
  49                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 wps {
  53                         label = "wn3000rpv3:green:wps";
  54                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 l_arrow {
  58                         label = "wn3000rpv3:blue:leftarrow";
  59                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 r_arrow {
  63                         label = "wn3000rpv3:blue:rightarrow";
  64                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  65                 };
  66         };
  67
  68         gpio-keys-polled {
  69                 compatible = "gpio-keys-polled";
  70                 #address-cells = <1>;
  71                 #size-cells = <0>;
  72                 poll-interval = <20>;
  73
  74                 reset {
  75                         label = "reset";
  76                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  77                         linux,code = <KEY_RESTART>;
  78                 };
  79
  80                 wps {
  81                         label = "wps";
  82                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  83                         linux,code = <KEY_WPS_BUTTON>;
  84                 };
  85         };
  86 };
  87
  88 &gpio1 {
  89         status = "okay";
  90 };
  91
  92 &spi0 {
  93         status = "okay";
  94
  95         m25p80@0 {
  96                 #address-cells = <1>;
  97                 #size-cells = <1>;
  98                 compatible = "jedec,spi-nor";
  99                 reg = <0>;
 100                 spi-max-frequency = <10000000>;
 101
 102                 partition@0 {
 103                         label = "u-boot";
 104                         reg = <0x0 0x30000>;
 105                         read-only;
 106                 };
 107
 108                 partition@30000 {
 109                         label = "u-boot-env";
 110                         reg = <0x30000 0x10000>;
 111                         read-only;
 112                 };
 113
 114                 partition@40000 {
 115                         label = "firmware";
 116                         reg = <0x40000 0x7b0000>;
 117                 };
 118
 119                 art: partition@7f0000 {
 120                         label = "art";
 121                         reg = <0x7f0000 0x10000>;
 122                         read-only;
 123                 };
 124         };
 125 };
 126
 127 &ethernet {
 128         mtd-mac-address = <&art 0x0>;
 129 };
 130
 131 &wmac {
 132         mtd-mac-address = <&art 0x6>;
 133         ralink,mtd-eeprom = <&art 0x1000>;
 134 };
 135
 136 &pinctrl {
 137         state_default: pinctrl0 {
 138                 default {
 139                         ralink,group = "i2c", "uartf", "spi refclk";
 140                         ralink,function = "gpio";
 141                 };
 142         };
 143 };