target/linux/ramips/dts/WN-GX300GR.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "iodata,wn-gx300gr", "mediatek,mt7621-soc";
  10         model = "I-O DATA WN-GX300GR";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21                 reg = <0x0 0x4000000>;
  22         };
  23
  24         chosen {
  25                 bootargs = "console=ttyS0,115200";
  26         };
  27
  28         leds {
  29                 compatible = "gpio-leds";
  30
  31                 led_power: power {
  32                         label = "wn-gx300gr:green:power";
  33                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 wps {
  37                         label = "wn-gx300gr:green:wps";
  38                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  39                 };
  40         };
  41
  42         keys {
  43                 compatible = "gpio-keys-polled";
  44                 poll-interval = <20>;
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51
  52                 wps {
  53                         label = "wps";
  54                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  55                         linux,code = <KEY_WPS_BUTTON>;
  56                 };
  57
  58                 auto {
  59                         label = "auto";
  60                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  61                         linux,code = <BTN_0>;
  62                         linux,input-type = <EV_SW>;
  63                 };
  64
  65                 custom {
  66                         label = "custom";
  67                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
  68                         linux,code = <BTN_0>;
  69                         linux,input-type = <EV_SW>;
  70                 };
  71         };
  72 };
  73
  74 &spi0 {
  75         status = "okay";
  76
  77         m25p80@0 {
  78                 compatible = "jedec,spi-nor";
  79                 reg = <0>;
  80                 spi-max-frequency = <10000000>;
  81
  82                 partitions {
  83                         compatible = "fixed-partitions";
  84                         #address-cells = <1>;
  85                         #size-cells = <1>;
  86
  87                         partition@0 {
  88                                 label = "Bootloader";
  89                                 reg = <0x0 0x30000>;
  90                                 read-only;
  91                         };
  92
  93                         partition@30000 {
  94                                 label = "Config";
  95                                 reg = <0x30000 0x10000>;
  96                                 read-only;
  97                         };
  98
  99                         Factory: partition@40000 {
 100                                 label = "Factory";
 101                                 reg = <0x40000 0x10000>;
 102                                 read-only;
 103                         };
 104
 105                         partition@50000 {
 106                                 label = "iNIC_rf";
 107                                 reg = <0x50000 0x10000>;
 108                                 read-only;
 109                         };
 110
 111                         partition@60000 {
 112                                 compatible = "denx,uimage";
 113                                 label = "firmware";
 114                                 reg = <0x60000 0x770000>;
 115                         };
 116
 117                         partition@7d0000 {
 118                                 label = "Key";
 119                                 reg = <0x7d0000 0x10000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@7e0000 {
 124                                 label = "backup";
 125                                 reg = <0x7e0000 0x10000>;
 126                                 read-only;
 127                         };
 128
 129                         partition@7f0000 {
 130                                 label = "storage";
 131                                 reg = <0x7f0000 0x10000>;
 132                                 read-only;
 133                         };
 134                 };
 135         };
 136 };
 137
 138 &ethernet {
 139         mtd-mac-address = <&Factory 0x4>;
 140 };
 141
 142 &pinctrl {
 143         state_default: pinctrl0 {
 144                 gpio {
 145                         ralink,group = "uart2", "uart3", "jtag";
 146                         ralink,function = "gpio";
 147                 };
 148         };
 149 };
 150
 151 &pcie {
 152         status = "okay";
 153 };
 154
 155 &pcie0 {
 156         mt76@0,0 {
 157                 reg = <0x0000 0 0 0 0>;
 158                 mediatek,mtd-eeprom = <&Factory 0x0>;
 159         };
 160 };
 161
 162 &xhci {
 163         status = "disabled";
 164 };