5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "iodata,wn-ax1167gr", "mediatek,mt7621-soc";
10 model = "I-O DATA WN-AX1167GR";
13 device_type = "memory";
14 reg = <0x0 0x4000000>;
18 bootargs = "console=ttyS0,115200";
22 compatible = "gpio-leds";
25 label = "wn-ax1167gr:green:power";
26 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
30 label = "wn-ax1167gr:green:wps";
31 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
36 compatible = "gpio-keys-polled";
43 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RESTART>;
49 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_WPS_BUTTON>;
55 gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
57 linux,input-type = <EV_SW>;
62 gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
64 linux,input-type = <EV_SW>;
75 compatible = "jedec,spi-nor";
77 spi-max-frequency = <10000000>;
78 m25p,chunked-io = <32>;
88 reg = <0x30000 0x10000>;
92 Factory: partition@40000 {
94 reg = <0x40000 0x10000>;
98 iNIC_rf: partition@50000 {
100 reg = <0x50000 0x10000>;
106 reg = <0x60000 0xf30000>;
111 reg = <0xf90000 0x10000>;
117 reg = <0xfa0000 0x10000>;
123 reg = <0xfb0000 0x50000>;
130 mtd-mac-address = <&iNIC_rf 0x4>;
134 state_default: pinctrl0 {
136 ralink,group = "uart2", "uart3", "jtag";
137 ralink,function = "gpio";
147 reg = <0x0000 0 0 0 0>;
149 mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
155 reg = <0x0000 0 0 0 0>;
157 mediatek,mtd-eeprom = <&Factory 0x0>;
158 ieee80211-freq-limit = <5000000 6000000>;