target/linux/ramips/dts/WN-AC733GR3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7620a.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "iodata,wn-ac733gr3", "ralink,mt7620a-soc";
  11         model = "I-O DATA WN-AC733GR3";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         memory@0 {
  21                 device_type = "memory";
  22                 reg = <0x0 0x4000000>;
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 led_power: power {
  29                         label = "wn-ac733gr3:green:power";
  30                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  31                         default-state = "on";
  32                 };
  33
  34                 notification {
  35                         label = "wn-ac733gr3:green:notification";
  36                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 wlan2g {
  40                         label = "wn-ac733gr3:green:wlan2g";
  41                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 wlan5g {
  45                         label = "wn-ac733gr3:green:wlan5g";
  46                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  47                 };
  48         };
  49
  50         keys {
  51                 compatible = "gpio-keys-polled";
  52                 poll-interval = <20>;
  53
  54                 reset {
  55                         label = "reset";
  56                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  57                         linux,code = <KEY_RESTART>;
  58                 };
  59
  60                 wps {
  61                         label = "wps";
  62                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  63                         linux,code = <KEY_WPS_BUTTON>;
  64                 };
  65
  66                 router {
  67                         label = "router";
  68                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  69                         linux,code = <BTN_0>;
  70                         linux,input-type = <EV_SW>;
  71                 };
  72
  73                 auto {
  74                         label = "auto";
  75                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  76                         linux,code = <BTN_0>;
  77                         linux,input-type = <EV_SW>;
  78                 };
  79         };
  80
  81         rtl8367rb {
  82                 compatible = "realtek,rtl8367b";
  83                 gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>;
  84                 gpio-sck = <&gpio0 23 GPIO_ACTIVE_HIGH>;
  85                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
  86         };
  87 };
  88
  89 &spi0 {
  90         status = "okay";
  91
  92         flash@0 {
  93                 compatible = "jedec,spi-nor";
  94                 reg = <0>;
  95                 spi-max-frequency = <10000000>;
  96
  97                 partitions {
  98                         compatible = "fixed-partitions";
  99                         #address-cells = <1>;
 100                         #size-cells = <1>;
 101
 102                         partition@0 {
 103                                 label = "u-boot";
 104                                 reg = <0x0 0x30000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@30000 {
 109                                 label = "u-boot-env";
 110                                 reg = <0x30000 0x10000>;
 111                                 read-only;
 112                         };
 113
 114                         Factory: partition@40000 {
 115                                 label = "Factory";
 116                                 reg = <0x40000 0x8000>;
 117                                 read-only;
 118                         };
 119
 120                         iNIC_rf: partition@48000 {
 121                                 label = "iNIC_rf";
 122                                 reg = <0x48000 0x8000>;
 123                                 read-only;
 124                         };
 125
 126                         partition@50000 {
 127                                 compatible = "denx,uimage";
 128                                 label = "firmware";
 129                                 reg = <0x50000 0x6d4000>;
 130                         };
 131
 132                         partition@724000 {
 133                                 label = "manufacture";
 134                                 reg = <0x724000 0x8c000>;
 135                                 read-only;
 136                         };
 137
 138                         partition@7b0000 {
 139                                 label = "backup";
 140                                 reg = <0x7b0000 0x10000>;
 141                                 read-only;
 142                         };
 143
 144                         partition@7c0000 {
 145                                 label = "storage";
 146                                 reg = <0x7c0000 0x40000>;
 147                                 read-only;
 148                         };
 149                 };
 150         };
 151 };
 152
 153 &ethernet {
 154         pinctrl-names = "default";
 155         pinctrl-0 = <&rgmii1_pins>;
 156         mtd-mac-address = <&Factory 0x4>;
 157
 158         port@5 {
 159                 status = "okay";
 160                 mediatek,fixed-link = <1000 1 1 1>;
 161                 phy-mode = "rgmii";
 162         };
 163 };
 164
 165 &gpio0 {
 166         rtl8367rb_reset {
 167                 gpio-hog;
 168                 gpios = <0 GPIO_ACTIVE_HIGH>;
 169                 output-high;
 170                 line-name = "rtl8367rb-reset";
 171         };
 172 };
 173
 174 &pinctrl {
 175         state_default: pinctrl0 {
 176                 gpio {
 177                         ralink,group = "i2c", "uartf", "mdio";
 178                         ralink,function = "gpio";
 179                 };
 180         };
 181 };
 182
 183 &pcie {
 184         status = "okay";
 185 };
 186
 187 &pcie0 {
 188         wifi@0,0 {
 189                 compatible = "mediatek,mt76";
 190                 reg = <0x0000 0 0 0 0>;
 191                 mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
 192                 ieee80211-freq-limit = <5000000 6000000>;
 193         };
 194 };
 195
 196 &wmac {
 197         ralink,mtd-eeprom = <&Factory 0x0>;
 198 };