ramips: add support for WIZnet WizFi630S board
[oweals/openwrt.git] / target / linux / ramips / dts / WL-WN570HA1.dts
1 /dts-v1/;
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/gpio/gpio.h>
4
5 #include "mt7628an.dtsi"
6
7 / {
8         compatible = "wavlink,wl-wn570ha1", "mediatek,mt7628an-soc";
9         model = "Wavlink WL-WN570HA1";
10
11         chosen {
12                 bootargs = "console=ttyS0,57600";
13         };
14
15         memory@0 {
16                 device_type = "memory";
17                 reg = <0x0 0x4000000>;
18         };
19
20         keys {
21                 compatible = "gpio-keys-polled";
22                 poll-interval = <20>;
23
24                 reset {
25                         label = "reset";
26                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
27                         linux,code = <KEY_RESTART>;
28                 };
29         };
30
31         leds {
32                 compatible = "gpio-leds";
33
34                 power {
35                         label = "wl-wn570ha1:green:power";
36                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
37                         default-state = "keep";
38                 };
39
40                 wan {
41                         label = "wl-wn570ha1:green:wan";
42                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
43                 };
44
45                 wifi-high {
46                         label = "wl-wn570ha1:green:wifi-high";
47                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
48                 };
49
50                 wifi-med {
51                         label = "wl-wn570ha1:green:wifi-med";
52                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
53                 };
54
55                 wifi-low {
56                         label = "wl-wn570ha1:green:wifi-low";
57                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
58                 };
59
60                 wifi {
61                         label = "wl-wn570ha1:green:wifi";
62                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
63                 };
64         };
65 };
66
67 &pinctrl {
68         state_default: pinctrl0 {
69                 gpio {
70                         ralink,group = "i2c", "wled_an", "p0led_an", "wdt", "refclk";
71                         ralink,function = "gpio";
72                 };
73         };
74 };
75
76 &pcie {
77         status = "okay";
78 };
79
80 &pcie0 {
81         wifi@0,0 {
82                 reg = <0x0000 0 0 0 0>;
83                 mediatek,mtd-eeprom = <&factory 0x8000>;
84                 ieee80211-freq-limit = <5000000 6000000>;
85         };
86 };
87
88 &spi0 {
89         status = "okay";
90
91         flash@0 {
92                 compatible = "jedec,spi-nor";
93                 reg = <0>;
94                 spi-max-frequency = <10000000>;
95
96                 partitions {
97                         compatible = "fixed-partitions";
98                         #address-cells = <1>;
99                         #size-cells = <1>;
100
101                         partition@0 {
102                                 label = "u-boot";
103                                 reg = <0x0 0x30000>;
104                                 read-only;
105                         };
106
107                         partition@30000 {
108                                 label = "u-boot-env";
109                                 reg = <0x30000 0x10000>;
110                                 read-only;
111                         };
112
113                         factory: partition@40000 {
114                                 label = "factory";
115                                 reg = <0x40000 0x10000>;
116                                 read-only;
117                         };
118
119                         partition@50000 {
120                                 compatible = "denx,uimage";
121                                 label = "firmware";
122                                 reg = <0x50000 0x7b0000>;
123                         };
124                 };
125         };
126 };
127
128 &wmac {
129         status = "okay";
130 };
131
132 &ethernet {
133         mtd-mac-address = <&factory 0x2e>;
134         mediatek,portmap = "llllw";
135 };