3 /include/ "rt3050.dtsi"
6 compatible = "WL-351", "ralink,rt3052-soc";
7 model = "Sitecom WL-351 v1 002";
11 ralink,pinmux = "uartlite", "jtag", "sdram", "rgmii";
12 ralink,gpiomux = "i2c", "spi", "mdio";
13 ralink,uartmux = "gpio";
24 compatible = "cfi-flash";
25 reg = <0x1f000000 0x800000>;
40 reg = <0x30000 0x10000>;
44 factory: partition@40000 {
46 reg = <0x40000 0x10000>;
52 reg = <0x50000 0x3b0000>;
62 ralink,portmap = <0x3f>;
63 ralink,fct2 = <0x0002500c>;
65 * ext phy base addr 31, rx/tx clock skew 0,
66 * turbo mii off, rgmi 3.3v off, port 5 polling off
67 * port5: enabled, gige, full-duplex, rx/tx-flow-control
68 * port6: enabled, gige, full-duplex, rx/tx-flow-control
70 ralink,fpa2 = <0x1f003fff>;
82 compatible = "gpio-leds";
84 label = "wl-351:amber:power";
88 label = "wl-351:amber:unpopulated";
89 gpios = <&gpio0 12 1>;
92 label = "wl-351:blue:unpopulated";
93 gpios = <&gpio0 13 1>;
98 compatible = "gpio-keys-polled";
101 poll-interval = <20>;
104 gpios = <&gpio0 10 1>;
105 linux,code = <0x198>;
109 gpios = <&gpio0 0 1>;
110 linux,code = <0x211>;
115 compatible = "rtl8367rb";
116 gpio-sda = <&gpio0 1 0>;
117 gpio-sck = <&gpio0 2 0>;