5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "sitecom,wl-351", "ralink,rt3052-soc";
10 model = "Sitecom WL-351 v1 002";
13 compatible = "cfi-flash";
14 reg = <0x1f000000 0x800000>;
28 reg = <0x30000 0x10000>;
32 factory: partition@40000 {
34 reg = <0x40000 0x10000>;
40 reg = <0x50000 0x3b0000>;
45 compatible = "gpio-leds";
48 label = "wl-351:amber:power";
49 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
53 label = "wl-351:amber:unpopulated";
54 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
58 label = "wl-351:blue:unpopulated";
59 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
64 compatible = "gpio-keys-polled";
71 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
72 linux,code = <KEY_RESTART>;
77 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
78 linux,code = <KEY_WPS_BUTTON>;
83 compatible = "realtek,rtl8366rb";
84 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
85 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
90 state_default: pinctrl0 {
92 ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
93 ralink,function = "gpio";
96 ralink,group = "rgmii";
97 ralink,function = "rgmii";
103 mtd-mac-address = <&factory 0x4>;
108 mediatek,portmap = <0x3f>;
109 ralink,fct2 = <0x0002500c>;
111 * ext phy base addr 31, rx/tx clock skew 0,
112 * turbo mii off, rgmi 3.3v off, port 5 polling off
113 * port5: enabled, gige, full-duplex, rx/tx-flow-control
114 * port6: enabled, gige, full-duplex, rx/tx-flow-control
116 ralink,fpa2 = <0x1f003fff>;
120 ralink,mtd-eeprom = <&factory 0>;