3 /include/ "rt3050.dtsi"
6 compatible = "WL-351", "ralink,rt3052-soc";
7 model = "Sitecom WL-351 v1 002";
10 state_default: pinctrl0 {
12 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
13 ralink,function = "gpio";
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
35 reg = <0x30000 0x10000>;
39 factory: partition@40000 {
41 reg = <0x40000 0x10000>;
47 reg = <0x50000 0x3b0000>;
52 mtd-mac-address = <&factory 0x4>;
56 ralink,portmap = <0x3f>;
57 ralink,fct2 = <0x0002500c>;
59 * ext phy base addr 31, rx/tx clock skew 0,
60 * turbo mii off, rgmi 3.3v off, port 5 polling off
61 * port5: enabled, gige, full-duplex, rx/tx-flow-control
62 * port6: enabled, gige, full-duplex, rx/tx-flow-control
64 ralink,fpa2 = <0x1f003fff>;
72 compatible = "gpio-leds";
74 label = "wl-351:amber:power";
78 label = "wl-351:amber:unpopulated";
79 gpios = <&gpio0 12 1>;
82 label = "wl-351:blue:unpopulated";
83 gpios = <&gpio0 13 1>;
88 compatible = "gpio-keys-polled";
94 gpios = <&gpio0 10 1>;
100 linux,code = <0x211>;
105 compatible = "rtl8367rb";
106 gpio-sda = <&gpio0 1 0>;
107 gpio-sck = <&gpio0 2 0>;