3 /include/ "rt3050.dtsi"
6 compatible = "WL-351", "ralink,rt3052-soc";
7 model = "Sitecom WL-351 v1 002";
10 ralink,memory = <0x0 0x200000 0x4000000>;
15 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
20 ralink,pinmux = "uartlite", "jtag", "sdram", "rgmii";
21 ralink,gpiomux = "i2c", "spi", "mdio";
22 ralink,uartmux = "gpio";
33 compatible = "cfi-flash";
34 reg = <0x1f000000 0x800000>;
48 ralink,portmap = <0x3f>;
49 ralink,fct2 = <0x0002500c>;
51 * ext phy base addr 31, rx/tx clock skew 0,
52 * turbo mii off, rgmi 3.3v off, port 5 polling off
53 * port5: enabled, gige, full-duplex, rx/tx-flow-control
54 * port6: enabled, gige, full-duplex, rx/tx-flow-control
56 ralink,fpa2 = <0x1f003fff>;
68 compatible = "gpio-leds";
70 label = "wl-351:amber:power";
74 label = "wl-351:amber:unpopulated";
78 label = "wl-351:blue:unpopulated";
84 compatible = "gpio-keys-polled";
101 compatible = "rtl8367rb";
102 gpio-sda = <&gpio0 1 0>;
103 gpio-sck = <&gpio0 2 0>;