target/linux/ramips/dts/WL-351.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WL-351", "ralink,rt3052-soc";
   7         model = "Sitecom WL-351 v1 002";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16
  17                 partition@0 {
  18                         label = "u-boot";
  19                         reg = <0x0 0x30000>;
  20                         read-only;
  21                 };
  22
  23                 partition@30000 {
  24                         label = "u-boot-env";
  25                         reg = <0x30000 0x10000>;
  26                         read-only;
  27                 };
  28
  29                 factory: partition@40000 {
  30                         label = "factory";
  31                         reg = <0x40000 0x10000>;
  32                         read-only;
  33                 };
  34
  35                 partition@50000 {
  36                         label = "firmware";
  37                         reg = <0x50000 0x3b0000>;
  38                 };
  39         };
  40
  41         gpio-leds {
  42                 compatible = "gpio-leds";
  43
  44                 power {
  45                         label = "wl-351:amber:power";
  46                         gpios = <&gpio0 8 1>;
  47                 };
  48
  49                 unpopulated {
  50                         label = "wl-351:amber:unpopulated";
  51                         gpios = <&gpio0 12 1>;
  52                 };
  53
  54                 unpopulated2 {
  55                         label = "wl-351:blue:unpopulated";
  56                         gpios = <&gpio0 13 1>;
  57                 };
  58         };
  59
  60         gpio-keys-polled {
  61                 compatible = "gpio-keys-polled";
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64                 poll-interval = <20>;
  65
  66                 reset {
  67                         label = "reset";
  68                         gpios = <&gpio0 10 1>;
  69                         linux,code = <0x198>;
  70                 };
  71
  72                 wps {
  73                         label = "wps";
  74                         gpios = <&gpio0 0 1>;
  75                         linux,code = <0x211>;
  76                 };
  77         };
  78
  79         rtl8366rb {
  80                 compatible = "rtl8366rb";
  81                 gpio-sda = <&gpio0 1 0>;
  82                 gpio-sck = <&gpio0 2 0>;
  83         };
  84 };
  85
  86 &pinctrl {
  87         state_default: pinctrl0 {
  88                 gpio {
  89                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  90                         ralink,function = "gpio";
  91                 };
  92         };
  93 };
  94
  95 &ethernet {
  96         mtd-mac-address = <&factory 0x4>;
  97 };
  98
  99 &esw {
 100         mediatek,portmap = <0x3f>;
 101         ralink,fct2 = <0x0002500c>;
 102         /*
 103          * ext phy base addr 31, rx/tx clock skew 0,
 104          * turbo mii off, rgmi 3.3v off, port 5 polling off
 105          * port5: enabled, gige, full-duplex, rx/tx-flow-control
 106          * port6: enabled, gige, full-duplex, rx/tx-flow-control
 107         */
 108         ralink,fpa2 = <0x1f003fff>;
 109 };
 110
 111 &wmac {
 112         ralink,mtd-eeprom = <&factory 0>;
 113 };
 114
 115 &otg {
 116         status = "okay";
 117 };