5 #include <dt-bindings/input/input.h>
8 compatible = "WL-351", "ralink,rt3052-soc";
9 model = "Sitecom WL-351 v1 002";
12 compatible = "cfi-flash";
13 reg = <0x1f000000 0x800000>;
27 reg = <0x30000 0x10000>;
31 factory: partition@40000 {
33 reg = <0x40000 0x10000>;
39 reg = <0x50000 0x3b0000>;
44 compatible = "gpio-leds";
47 label = "wl-351:amber:power";
52 label = "wl-351:amber:unpopulated";
53 gpios = <&gpio0 12 1>;
57 label = "wl-351:blue:unpopulated";
58 gpios = <&gpio0 13 1>;
63 compatible = "gpio-keys-polled";
70 gpios = <&gpio0 10 1>;
71 linux,code = <KEY_RESTART>;
77 linux,code = <KEY_WPS_BUTTON>;
82 compatible = "rtl8366rb";
83 gpio-sda = <&gpio0 1 0>;
84 gpio-sck = <&gpio0 2 0>;
89 state_default: pinctrl0 {
91 ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
92 ralink,function = "gpio";
95 ralink,group = "rgmii";
96 ralink,function = "rgmii";
102 mtd-mac-address = <&factory 0x4>;
107 mediatek,portmap = <0x3f>;
108 ralink,fct2 = <0x0002500c>;
110 * ext phy base addr 31, rx/tx clock skew 0,
111 * turbo mii off, rgmi 3.3v off, port 5 polling off
112 * port5: enabled, gige, full-duplex, rx/tx-flow-control
113 * port6: enabled, gige, full-duplex, rx/tx-flow-control
115 ralink,fpa2 = <0x1f003fff>;
119 ralink,mtd-eeprom = <&factory 0>;