target/linux/ramips/dts/WL-341V3.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "sitecom,wl-341-v3", "ralink,rt3052-soc";
  10         model = "Sitecom WL-341 v3";
  11
  12         cfi@1f000000 {
  13                 compatible = "cfi-flash";
  14                 reg = <0x1f000000 0x800000>;
  15                 bank-width = <2>;
  16                 device-width = <2>;
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19
  20                 partition@0 {
  21                         label = "u-boot";
  22                         reg = <0x0 0x20000>;
  23                         read-only;
  24                 };
  25
  26                 boardnvram: partition@20000 {
  27                         label = "board-nvram";
  28                         reg = <0x20000 0x10000>;
  29                         read-only;
  30                 };
  31
  32                 partition@30000 {
  33                         label = "u-boot-env";
  34                         reg = <0x30000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 partition@40000 {
  39                         label = "firmware";
  40                         reg = <0x40000 0x3b0000>;
  41                 };
  42         };
  43
  44         gpio-leds {
  45                 compatible = "gpio-leds";
  46
  47                 first {
  48                         label = "wl-341v3:amber:first";
  49                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 first2 {
  53                         label = "wl-341v3:blue:first";
  54                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 third {
  58                         label = "wl-341v3:amber:third";
  59                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 third2 {
  63                         label = "wl-341v3:blue:third";
  64                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 fourth {
  68                         label = "wl-341v3:blue:fourth";
  69                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  70                 };
  71
  72                 fifth {
  73                         label = "wl-341v3:amber:fifth";
  74                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  75                 };
  76
  77                 fifth2 {
  78                         label = "wl-341v3:blue:fifth";
  79                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  80                 };
  81         };
  82
  83         gpio-keys-polled {
  84                 compatible = "gpio-keys-polled";
  85                 #address-cells = <1>;
  86                 #size-cells = <0>;
  87                 poll-interval = <20>;
  88
  89                 reset {
  90                         label = "reset";
  91                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  92                         linux,code = <KEY_RESTART>;
  93                 };
  94
  95                 wps {
  96                         label = "wps";
  97                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
  98                         linux,code = <KEY_WPS_BUTTON>;
  99                 };
 100         };
 101 };
 102
 103 &pinctrl {
 104         state_default: pinctrl0 {
 105                 gpio {
 106                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
 107                         ralink,function = "gpio";
 108                 };
 109         };
 110 };
 111
 112 &ethernet {
 113         mtd-mac-address = <&boardnvram 0xffa0>;
 114 };
 115
 116 &esw {
 117         mediatek,portmap = <0x3e>;
 118 };
 119
 120 &wmac {
 121         ralink,mtd-eeprom = <&boardnvram 0xfd70>;
 122 };
 123
 124 &otg {
 125         status = "okay";
 126 };