target/linux/ramips/dts/WIZFI630A.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
  10         model = "WIZnet WizFi630A";
  11
  12         chosen {
  13                 bootargs = "console=ttyS1,115200";
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 run {
  20                         label = "wizfi630a::run";
  21                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 wps {
  25                         label = "wizfi630a::wps";
  26                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 uart1 {
  30                         label = "wizfi630a::uart1";
  31                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 uart2 {
  35                         label = "wizfi630a::uart2";
  36                         gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         gpio-keys-polled {
  41                 compatible = "gpio-keys-polled";
  42                 #address-cells = <1>;
  43                 #size-cells = <0>;
  44                 poll-interval = <20>;
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51
  52                 wps {
  53                         label = "wps";
  54                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  55                         linux,code = <KEY_WPS_BUTTON>;
  56                 };
  57
  58                 scm1 {
  59                         label = "SCM1";
  60                         gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
  61                         linux,code = <BTN_0>;
  62                 };
  63
  64                 scm2 {
  65                         label = "SCM2";
  66                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  67                         linux,code = <BTN_1>;
  68                 };
  69         };
  70 };
  71
  72 &gpio1 {
  73         status = "okay";
  74 };
  75
  76 &spi0 {
  77         status = "okay";
  78
  79         m25p80@0 {
  80                 #address-cells = <1>;
  81                 #size-cells = <1>;
  82                 compatible = "jedec,spi-nor";
  83                 reg = <0>;
  84                 spi-max-frequency = <10000000>;
  85
  86                 partition@0 {
  87                         #size-cells = <1>;
  88                         label = "uboot";
  89                         reg = <0x0 0x30000>;
  90                         read-only;
  91                 };
  92
  93                 partition@30000 {
  94                         #size-cells = <1>;
  95                         label = "uboot-env";
  96                         reg = <0x30000 0x10000>;
  97                         read-only;
  98                 };
  99
 100                 factory: partition@40000 {
 101                         #size-cells = <1>;
 102                         label = "factory";
 103                         reg = <0x40000 0x10000>;
 104                         read-only;
 105                 };
 106
 107                 partition@50000 {
 108                         #size-cells = <1>;
 109                         label = "firmware";
 110                         reg = <0x50000 0xfb0000>;
 111                 };
 112         };
 113 };
 114
 115 &uart {
 116         status = "okay";
 117         pinctrl-names = "default";
 118         pinctrl-0 = <&uartf_pins>;
 119 };
 120
 121 &pinctrl {
 122         state_default: pinctrl0 {
 123                 gpio {
 124                         ralink,group = "i2c", "jtag" ;
 125                         ralink,function = "gpio";
 126                 };
 127         };
 128 };
 129
 130 &ethernet {
 131         mtd-mac-address = <&factory 0x4>;
 132 };
 133
 134 &esw {
 135         mediatek,portmap = <0x17>;
 136 };
 137
 138 &wmac {
 139         ralink,mtd-eeprom = <&factory 0>;
 140 };
 141
 142 &ehci {
 143         status = "okay";
 144 };
 145
 146 &ohci {
 147         status = "okay";
 148 };