target/linux/ramips/dts/WIZFI630A.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "wizfi630a", "ralink,rt5350-soc";
   9         model = "WIZnet WizFi630A";
  10
  11         chosen {
  12                 bootargs = "console=ttyS1,115200";
  13         };
  14
  15         gpio-export {
  16                 compatible = "gpio-export";
  17                 #size-cells = <0>;
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 run {
  24                         label = "wizfi630a::run";
  25                         gpios = <&gpio0 1 1>;
  26                 };
  27
  28                 wps {
  29                         label = "wizfi630a::wps";
  30                         gpios = <&gpio0 20 1>;
  31                 };
  32
  33                 uart1 {
  34                         label = "wizfi630a::uart1";
  35                         gpios = <&gpio0 18 1>;
  36                 };
  37
  38                 uart2 {
  39                         label = "wizfi630a::uart2";
  40                         gpios = <&gpio0 21 1>;
  41                 };
  42         };
  43
  44         gpio-keys-polled {
  45                 compatible = "gpio-keys-polled";
  46                 #address-cells = <1>;
  47                 #size-cells = <0>;
  48                 poll-interval = <20>;
  49
  50                 reset {
  51                         label = "reset";
  52                         gpios = <&gpio0 17 1>;
  53                         linux,code = <KEY_RESTART>;
  54                 };
  55
  56                 wps {
  57                         label = "wps";
  58                         gpios = <&gpio0 0 1>;
  59                         linux,code = <KEY_WPS_BUTTON>;
  60                 };
  61
  62                 scm1 {
  63                         label = "SCM1";
  64                         gpios = <&gpio0 19 1>;
  65                         linux,code = <BTN_0>;
  66                 };
  67
  68                 scm2 {
  69                         label = "SCM2";
  70                         gpios = <&gpio0 2 1>;
  71                         linux,code = <BTN_1>;
  72                 };
  73         };
  74 };
  75
  76 &gpio1 {
  77         status = "okay";
  78 };
  79
  80 &spi0 {
  81         status = "okay";
  82
  83         m25p80@0 {
  84                 #address-cells = <1>;
  85                 #size-cells = <1>;
  86                 compatible = "jedec,spi-nor";
  87                 reg = <0>;
  88                 spi-max-frequency = <10000000>;
  89
  90                 partition@0 {
  91                         #size-cells = <1>;
  92                         label = "uboot";
  93                         reg = <0x0 0x30000>;
  94                         read-only;
  95                 };
  96
  97                 partition@30000 {
  98                         #size-cells = <1>;
  99                         label = "uboot-env";
 100                         reg = <0x30000 0x10000>;
 101                         read-only;
 102                 };
 103
 104                 factory: partition@40000 {
 105                         #size-cells = <1>;
 106                         label = "factory";
 107                         reg = <0x40000 0x10000>;
 108                         read-only;
 109                 };
 110
 111                 partition@50000 {
 112                         #size-cells = <1>;
 113                         label = "firmware";
 114                         reg = <0x50000 0xfb0000>;
 115                 };
 116         };
 117 };
 118
 119 &uart {
 120         compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
 121         reg = <0x500 0x100>;
 122         resets = <&rstctrl 12>;
 123         reset-names = "uart";
 124         interrupt-parent = <&intc>;
 125         interrupts = <5>;
 126         reg-shift = <2>;
 127         pinctrl-names = "default";
 128         pinctrl-0 = <&uartf_pins>;
 129         status = "okay";
 130 };
 131
 132 &uartlite {
 133         compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
 134         reg = <0xc00 0x100>;
 135         resets = <&rstctrl 19>;
 136         reset-names = "uartl";
 137         interrupt-parent = <&intc>;
 138         interrupts = <12>;
 139         reg-shift = <2>;
 140         pinctrl-names = "default";
 141         pinctrl-0 = <&uartlite_pins>;
 142 };
 143
 144 &pinctrl {
 145         state_default: pinctrl0 {
 146                 gpio {
 147                         ralink,group = "i2c", "jtag" ;
 148                         ralink,function = "gpio";
 149                 };
 150         };
 151
 152         uartf_gpio_pins: uartf_gpio {
 153                 uartf_gpio {
 154                         ralink,group = "uartf";
 155                         ralink,function = "uartf";
 156                 };
 157         };
 158
 159         uartlite_pins: uartlite {
 160                 uart {
 161                         ralink,group = "uartlite";
 162                         ralink,function = "uartlite";
 163                 };
 164         };
 165 };
 166
 167 &ethernet {
 168         mtd-mac-address = <&factory 0x4>;
 169 };
 170
 171 &esw {
 172         mediatek,portmap = <0x17>;
 173 };
 174
 175 &wmac {
 176         ralink,mtd-eeprom = <&factory 0>;
 177 };
 178
 179 &ehci {
 180         status = "okay";
 181 };
 182
 183 &ohci {
 184         status = "okay";
 185 };