target/linux/ramips/dts/WF-2881.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
   7         model = "NETIS WF-2881";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x8000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600";
  16         };
  17
  18         nand@1e003000 {
  19                 status = "okay";
  20
  21                 partition@0 {
  22                         label = "u-boot";
  23                         reg = <0x0 0x30000>;
  24                         read-only;
  25                 };
  26
  27                 partition@30000 {
  28                         label = "u-boot-env";
  29                         reg = <0x30000 0x1000>;
  30                         read-only;
  31                 };
  32
  33                 partition@80000 {
  34                         label = "config";
  35                         reg = <0x80000 0x80000>;
  36                         read-only;
  37                 };
  38
  39                 factory: partition@100000 {
  40                         label = "factory";
  41                         reg = <0x100000 0x40000>;
  42                         read-only;
  43                 };
  44
  45                 partition@140000 {
  46                         label = "firmware";
  47                         reg = <0x140000 0x7E40000>;
  48                 };
  49         };
  50
  51         gpio-leds {
  52                 compatible = "gpio-leds";
  53
  54                 usb {
  55                         label = "wf-2881:green:usb";
  56                         gpios = <&gpio0 6 1>;
  57                 };
  58
  59                 wps {
  60                         label = "wf-2881:green:wps";
  61                         gpios = <&gpio0 0 1>;
  62                 };
  63         };
  64
  65         gpio-keys-polled {
  66                 compatible = "gpio-keys-polled";
  67                 #address-cells = <1>;
  68                 #size-cells = <0>;
  69                 poll-interval = <20>;
  70
  71                 reset {
  72                         label = "reset";
  73                         gpios = <&gpio0 12 1>;
  74                         linux,code = <0x198>;
  75                 };
  76         };
  77 };
  78
  79 &spi0 {
  80         status="disabled";
  81 };
  82
  83 &pcie {
  84         status = "okay";
  85
  86         pcie0 {
  87                 mt76@0,0 {
  88                         reg = <0x0000 0 0 0 0>;
  89                         device_type = "pci";
  90                         mediatek,mtd-eeprom = <&factory 0x8000>;
  91                         mediatek,2ghz = <0>;
  92                 };
  93         };
  94
  95         pcie1 {
  96                 mt76@1,0 {
  97                         reg = <0x0000 0 0 0 0>;
  98                         device_type = "pci";
  99                         mediatek,mtd-eeprom = <&factory 0x0000>;
 100                         mediatek,5ghz = <0>;
 101                 };
 102         };
 103 };
 104
 105 &ethernet {
 106         mtd-mac-address = <&factory 0xe006>;
 107 };
 108
 109 &pinctrl {
 110         state_default: pinctrl0 {
 111                 gpio {
 112                         ralink,group = "uart3", "jtag";
 113                         ralink,function = "gpio";
 114                 };
 115         };
 116 };