ramips: disable NAND device in mt7621.dtsi to fix boot errors on many devices
[oweals/openwrt.git] / target / linux / ramips / dts / WCR150GN.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6         compatible = "WCR150GN", "ralink,rt3050-soc";
7         model = "Sparklan WCR-150GN";
8
9         pinctrl {
10                 state_default: pinctrl0 {
11                         gpio {
12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
13                                 ralink,function = "gpio";
14                         };
15                 };
16         };
17
18         cfi@1f000000 {
19                 compatible = "cfi-flash";
20                 reg = <0x1f000000 0x800000>;
21                 bank-width = <2>;
22                 device-width = <2>;
23                 #address-cells = <1>;
24                 #size-cells = <1>;
25
26                 partition@0 {
27                         label = "u-boot";
28                         reg = <0x0 0x30000>;
29                         read-only;
30                 };
31
32                 partition@30000 {
33                         label = "u-boot-env";
34                         reg = <0x30000 0x10000>;
35                         read-only;
36                 };
37
38                 factory: partition@40000 {
39                         label = "factory";
40                         reg = <0x40000 0x10000>;
41                         read-only;
42                 };
43
44                 partition@50000 {
45                         label = "firmware";
46                         reg = <0x50000 0x3b0000>;
47                 };
48         };
49
50         gpio-leds {
51                 compatible = "gpio-leds";
52
53                 user {
54                         label = "wcr-150gn:amber:user";
55                         gpios = <&gpio0 12 1>;
56                 };
57
58                 power {
59                         label = "wcr-150gn:amber:power";
60                         gpios = <&gpio0 8 1>;
61                 };
62         };
63
64         gpio-keys-polled {
65                 compatible = "gpio-keys-polled";
66                 #address-cells = <1>;
67                 #size-cells = <0>;
68                 poll-interval = <20>;
69
70                 wps {
71                         label = "wps";
72                         gpios = <&gpio0 10 1>;
73                         linux,code = <0x211>;
74                 };
75
76                 reset {
77                         label = "reset";
78                         gpios = <&gpio0 0 1>;
79                         linux,code = <0x198>;
80                 };
81         };
82
83         ethernet@10100000 {
84                 mtd-mac-address = <&factory 0x4>;
85         };
86
87         esw@10110000 {
88                 mediatek,portmap = <0x2f>;
89         };
90
91         wmac@10180000 {
92                 ralink,mtd-eeprom = <&factory 0>;
93         };
94
95         otg@101c0000 {
96                 status = "okay";
97         };
98 };