target/linux/ramips/dts/UR-336UN.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "upvel,ur-336un", "ralink,rt3052-soc";
  10         model = "UPVEL UR-336UN";
  11
  12         aliases {
  13                 led-status = &led_wps;
  14         };
  15
  16         cfi@1f000000 {
  17                 compatible = "cfi-flash";
  18                 reg = <0x1f000000 0x800000>;
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21                 #address-cells = <1>;
  22                 #size-cells = <1>;
  23
  24                 partition@0 {
  25                         label = "u-boot";
  26                         reg = <0x0 0x30000>;
  27                         read-only;
  28                 };
  29
  30                 partition@30000 {
  31                         label = "u-boot-env";
  32                         reg = <0x30000 0x10000>;
  33                         read-only;
  34                 };
  35
  36                 factory: partition@40000 {
  37                         label = "factory";
  38                         reg = <0x40000 0x10000>;
  39                         read-only;
  40                 };
  41
  42                 partition@50000 {
  43                         label = "firmware";
  44                         reg = <0x50000 0x7b0000>;
  45                 };
  46         };
  47
  48         gpio-leds {
  49                 compatible = "gpio-leds";
  50
  51                 3g {
  52                         label = "ur-336un:green:3g";
  53                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 gateway {
  57                         label = "ur-336un:green:gateway";
  58                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 ap {
  62                         label = "ur-336un:green:ap";
  63                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 led_wps: wps {
  67                         label = "ur-336un:green:wps";
  68                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 station {
  72                         label = "ur-336un:green:station";
  73                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  74                 };
  75         };
  76
  77         gpio-keys-polled {
  78                 compatible = "gpio-keys-polled";
  79                 poll-interval = <20>;
  80
  81                 reset_wps {
  82                         label = "reset_wps";
  83                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  84                         linux,code = <KEY_RESTART>;
  85                 };
  86
  87                 mode {
  88                         label = "mode";
  89                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  90                         linux,code = <BTN_0>;
  91                 };
  92         };
  93 };
  94
  95 &pinctrl {
  96         state_default: pinctrl0 {
  97                 gpio {
  98                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  99                         ralink,function = "gpio";
 100                 };
 101         };
 102 };
 103
 104 &ethernet {
 105         mtd-mac-address = <&factory 0x4004>;
 106 };
 107
 108 &esw {
 109         mediatek,portmap = <0x2f>;
 110 };
 111
 112 &wmac {
 113         ralink,mtd-eeprom = <&factory 0>;
 114 };
 115
 116 &otg {
 117         status = "okay";
 118 };