target/linux/ramips/dts/UR-336UN.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "upvel,ur-336un", "ralink,rt3052-soc";
  10         model = "UPVEL UR-336UN";
  11
  12         cfi@1f000000 {
  13                 compatible = "cfi-flash";
  14                 reg = <0x1f000000 0x800000>;
  15                 bank-width = <2>;
  16                 device-width = <2>;
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19
  20                 partition@0 {
  21                         label = "u-boot";
  22                         reg = <0x0 0x30000>;
  23                         read-only;
  24                 };
  25
  26                 partition@30000 {
  27                         label = "u-boot-env";
  28                         reg = <0x30000 0x10000>;
  29                         read-only;
  30                 };
  31
  32                 factory: partition@40000 {
  33                         label = "factory";
  34                         reg = <0x40000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 partition@50000 {
  39                         label = "firmware";
  40                         reg = <0x50000 0x7b0000>;
  41                 };
  42         };
  43
  44         gpio-leds {
  45                 compatible = "gpio-leds";
  46
  47                 3g {
  48                         label = "ur-336un:green:3g";
  49                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 gateway {
  53                         label = "ur-336un:green:gateway";
  54                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 ap {
  58                         label = "ur-336un:green:ap";
  59                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 wps {
  63                         label = "ur-336un:green:wps";
  64                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 station {
  68                         label = "ur-336un:green:station";
  69                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  70                 };
  71         };
  72
  73         gpio-keys-polled {
  74                 compatible = "gpio-keys-polled";
  75                 #address-cells = <1>;
  76                 #size-cells = <0>;
  77                 poll-interval = <20>;
  78
  79                 reset_wps {
  80                         label = "reset_wps";
  81                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_RESTART>;
  83                 };
  84
  85                 mode {
  86                         label = "mode";
  87                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  88                         linux,code = <BTN_0>;
  89                 };
  90         };
  91 };
  92
  93 &pinctrl {
  94         state_default: pinctrl0 {
  95                 gpio {
  96                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  97                         ralink,function = "gpio";
  98                 };
  99         };
 100 };
 101
 102 &ethernet {
 103         mtd-mac-address = <&factory 0x4004>;
 104 };
 105
 106 &esw {
 107         mediatek,portmap = <0x2f>;
 108 };
 109
 110 &wmac {
 111         ralink,mtd-eeprom = <&factory 0>;
 112 };
 113
 114 &otg {
 115         status = "okay";
 116 };