5 #include <dt-bindings/input/input.h>
8 compatible = "TEW-692GR", "ralink,rt3883-soc";
9 model = "TRENDnet TEW-692GR";
12 compatible = "cfi-flash";
13 reg = <0x1c000000 0x800000>;
19 reg = <0x0 0x0030000>;
25 reg = <0x00030000 0x00010000>;
30 factory: partition@40000 {
31 reg = <0x00040000 0x00010000>;
37 reg = <0x00050000 0x007b0000>;
43 compatible = "gpio-keys-polled";
46 poll-interval = <100>;
50 gpios = <&gpio0 10 1>;
51 linux,code = <KEY_RESTART>;
57 linux,code = <KEY_WPS_BUTTON>;
62 compatible = "gpio-leds";
65 label = "tew-692gr:orange:wps";
70 label = "tew-692gr:green:wps";
81 state_default: pinctrl0 {
83 ralink,group = "spi", "i2c", "jtag", "uartf";
84 ralink,function = "gpio";
91 mtd-mac-address = <&factory 0x4>;
101 phy0: ethernet-phy@0 {
105 qca,ar8327-initvals = <
106 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
107 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
108 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
109 0x50 0xc437c437 /* LED Control Register 0 */
110 0x54 0xc337c337 /* LED Control Register 1 */
111 0x58 0x00000000 /* LED Control Register 2 */
112 0x5c 0x03ffff00 /* LED Control Register 3 */
113 0x7c 0x0000007e /* PORT0_STATUS */
114 0x94 0x0000007e /* PORT6 STATUS */
122 pinctrl-names = "default";
123 pinctrl-0 = <&pci_pins>;
127 ralink,group = "pci";
128 ralink,function = "pci-fnc";
137 compatible = "pci0,0";
138 reg = < 0x10000 0 0 0 0 >;
147 ralink,mtd-eeprom = <&factory 0x0>;
149 mtd-mac-address = <&factory 0x4>;
150 mtd-mac-address-increment = <3>;