kernel: bump 4.9 to 4.9.65
[oweals/openwrt.git] / target / linux / ramips / dts / TEW-692GR.dts
1 /dts-v1/;
2
3 #include "rt3883.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "trendnet,tew-692gr", "ralink,rt3883-soc";
10         model = "TRENDnet TEW-692GR";
11
12         nor-flash@1c000000 {
13                 compatible = "cfi-flash";
14                 reg = <0x1c000000 0x800000>;
15                 bank-width = <2>;
16                 #address-cells = <1>;
17                 #size-cells = <1>;
18
19                 partition@0 {
20                         reg = <0x0 0x0030000>;
21                         label = "u-boot";
22                         read-only;
23                 };
24
25                 partition@30000 {
26                         reg = <0x00030000 0x00010000>;
27                         label = "u-boot-env";
28                         read-only;
29                 };
30
31                 factory: partition@40000 {
32                         reg = <0x00040000 0x00010000>;
33                         label = "factory";
34                         read-only;
35                 };
36
37                 partition@50000 {
38                         reg = <0x00050000 0x007b0000>;
39                         label = "firmware";
40                 };
41         };
42
43         gpio-keys-polled {
44                 compatible = "gpio-keys-polled";
45                 #address-cells = <1>;
46                 #size-cells = <0>;
47                 poll-interval = <100>;
48
49                 reset {
50                         label = "reset";
51                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
52                         linux,code = <KEY_RESTART>;
53                 };
54
55                 wps {
56                         label = "wps";
57                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
58                         linux,code = <KEY_WPS_BUTTON>;
59                 };
60         };
61
62         gpio-leds {
63                 compatible = "gpio-leds";
64
65                 wps {
66                         label = "tew-692gr:orange:wps";
67                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
68                 };
69
70                 wps2 {
71                         label = "tew-692gr:green:wps";
72                         gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
73                 };
74         };
75 };
76
77 &gpio1 {
78         status = "okay";
79 };
80
81 &pinctrl {
82         state_default: pinctrl0 {
83                 gpio {
84                         ralink,group = "spi", "i2c", "jtag", "uartf";
85                         ralink,function = "gpio";
86                 };
87         };
88 };
89
90 &ethernet {
91         status = "okay";
92         mtd-mac-address = <&factory 0x4>;
93
94         port@0 {
95                 phy-handle = <&phy0>;
96                 phy-mode = "rgmii";
97         };
98
99         mdio-bus {
100                 status = "okay";
101
102                 phy0: ethernet-phy@0 {
103                         reg = <0>;
104                         phy-mode = "rgmii";
105
106                         qca,ar8327-initvals = <
107                                 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
108                                 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
109                                 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
110                                 0x50 0xc437c437 /* LED Control Register 0 */
111                                 0x54 0xc337c337 /* LED Control Register 1 */
112                                 0x58 0x00000000 /* LED Control Register 2 */
113                                 0x5c 0x03ffff00 /* LED Control Register 3 */
114                                 0x7c 0x0000007e /* PORT0_STATUS */
115                                 0x94 0x0000007e /* PORT6 STATUS */
116                         >;
117                 };
118         };
119 };
120
121 &pci {
122         status = "okay";
123         pinctrl-names = "default";
124         pinctrl-0 = <&pci_pins>;
125
126         pci_pins: pci {
127                 pci {
128                         ralink,group = "pci";
129                         ralink,function = "pci-fnc";
130                 };
131         };
132
133         host-bridge {
134                 pci-bridge@1 {
135                         status = "okay";
136
137                         wifi@0,0 {
138                                 compatible = "pci0,0";
139                                 reg = < 0x10000 0 0 0 0 >;
140                                 ralink,2ghz = <0>;
141                         };
142                 };
143         };
144 };
145
146 &wmac {
147         status = "okay";
148         ralink,mtd-eeprom = <&factory 0x0>;
149         ralink,5ghz = <0>;
150         mtd-mac-address = <&factory 0x4>;
151         mtd-mac-address-increment = <3>;
152 };