ramips: set usb led trigger via devicetree
[oweals/openwrt.git] / target / linux / ramips / dts / TEW-691GR.dts
1 /dts-v1/;
2
3 #include "rt3883.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "trendnet,tew-691gr", "ralink,rt3883-soc";
10         model = "TRENDnet TEW-691GR";
11
12         aliases {
13                 led-status = &led_wps;
14         };
15
16         nor-flash@1c000000 {
17                 compatible = "cfi-flash";
18                 reg = <0x1c000000 0x800000>;
19                 bank-width = <2>;
20
21                 partitions {
22                         compatible = "fixed-partitions";
23                         #address-cells = <1>;
24                         #size-cells = <1>;
25
26                         partition@0 {
27                                 reg = <0x0 0x0030000>;
28                                 label = "u-boot";
29                                 read-only;
30                         };
31
32                         partition@30000 {
33                                 reg = <0x00030000 0x00010000>;
34                                 label = "u-boot-env";
35                                 read-only;
36                         };
37
38                         factory: partition@40000 {
39                                 reg = <0x00040000 0x00010000>;
40                                 label = "factory";
41                                 read-only;
42                         };
43
44                         partition@50000 {
45                                 reg = <0x00050000 0x007b0000>;
46                                 label = "firmware";
47                         };
48                 };
49         };
50
51         gpio-keys-polled {
52                 compatible = "gpio-keys-polled";
53                 poll-interval = <100>;
54
55                 reset {
56                         label = "reset";
57                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
58                         linux,code = <KEY_RESTART>;
59                 };
60
61                 wps {
62                         label = "wps";
63                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
64                         linux,code = <KEY_WPS_BUTTON>;
65                 };
66
67                 rfkill {
68                         label = "rfkill";
69                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
70                         linux,code = <KEY_RFKILL>;
71                 };
72         };
73
74         gpio-leds {
75                 compatible = "gpio-leds";
76
77                 led_wps: wps {
78                         label = "tew-691gr:green:wps";
79                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
80                 };
81         };
82 };
83
84 &gpio1 {
85         status = "okay";
86 };
87
88 &pinctrl {
89         state_default: pinctrl0 {
90                 gpio {
91                         ralink,group = "spi", "i2c", "jtag", "uartf";
92                         ralink,function = "gpio";
93                 };
94         };
95 };
96
97 &ethernet {
98         mtd-mac-address = <&factory 0x4>;
99
100         port@0 {
101                 phy-handle = <&phy0>;
102                 phy-mode = "rgmii";
103         };
104
105         mdio-bus {
106                 status = "okay";
107
108                 phy0: ethernet-phy@0 {
109                         reg = <0>;
110                         phy-mode = "rgmii";
111                 };
112         };
113 };
114
115 &wmac {
116         status = "okay";
117         ralink,mtd-eeprom = <&factory 0x0>;
118         ralink,5ghz = <0>;
119         mtd-mac-address = <&factory 0x4>;
120         mtd-mac-address-increment = <1>;
121 };