ramips: Use dts alias based status led
[oweals/openwrt.git] / target / linux / ramips / dts / TEW-638APB-V2.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "trendnet,tew-638apb-v2", "ralink,rt3050-soc";
10         model = "TRENDnet TEW-638APB v2";
11
12         aliases {
13                 led-status = &led_wps_green;
14         };
15
16         cfi@1f000000 {
17                 compatible = "cfi-flash";
18                 reg = <0x1f000000 0x400000>;
19                 bank-width = <2>;
20                 device-width = <2>;
21                 #address-cells = <1>;
22                 #size-cells = <1>;
23
24                 partition@0 {
25                         label = "u-boot";
26                         reg = <0x0 0x30000>;
27                         read-only;
28                 };
29
30                 partition@30000 {
31                         label = "u-boot-env";
32                         reg = <0x30000 0x10000>;
33                         read-only;
34                 };
35
36                 factory: partition@40000 {
37                         label = "factory";
38                         reg = <0x40000 0x10000>;
39                         read-only;
40                 };
41
42                 partition@50000 {
43                         label = "firmware";
44                         reg = <0x50000 0x3b0000>;
45                 };
46         };
47
48         gpio-keys-polled {
49                 compatible = "gpio-keys-polled";
50                 #address-cells = <1>;
51                 #size-cells = <0>;
52                 poll-interval = <20>;
53
54                 reset {
55                         label = "reset";
56                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
57                         linux,code = <KEY_RESTART>;
58                 };
59
60                 wps {
61                         label = "wps";
62                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
63                         linux,code = <KEY_WPS_BUTTON>;
64                 };
65         };
66
67         gpio-leds {
68                 compatible = "gpio-leds";
69
70                 wps {
71                         label = "tew-638apb-v2:orange:wps";
72                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
73                 };
74
75                 led_wps_green: wps2 {
76                         label = "tew-638apb-v2:green:wps";
77                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
78                 };
79         };
80 };
81
82 &pinctrl {
83         state_default: pinctrl0 {
84                 gpio {
85                         ralink,group = "uartf";
86                         ralink,function = "gpio";
87                 };
88         };
89 };
90
91 &ethernet {
92         mtd-mac-address = <&factory 0x4>;
93 };
94
95 &esw {
96         mediatek,portmap = <0x2f>;
97 };
98
99 &wmac {
100         ralink,mtd-eeprom = <&factory 0>;
101 };