ramips: set usb led trigger via devicetree
[oweals/openwrt.git] / target / linux / ramips / dts / TEW-638APB-V2.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "trendnet,tew-638apb-v2", "ralink,rt3050-soc";
10         model = "TRENDnet TEW-638APB v2";
11
12         aliases {
13                 led-status = &led_wps_green;
14         };
15
16         cfi@1f000000 {
17                 compatible = "cfi-flash";
18                 reg = <0x1f000000 0x400000>;
19                 bank-width = <2>;
20                 device-width = <2>;
21
22                 partitions {
23                         compatible = "fixed-partitions";
24                         #address-cells = <1>;
25                         #size-cells = <1>;
26
27                         partition@0 {
28                                 label = "u-boot";
29                                 reg = <0x0 0x30000>;
30                                 read-only;
31                         };
32
33                         partition@30000 {
34                                 label = "u-boot-env";
35                                 reg = <0x30000 0x10000>;
36                                 read-only;
37                         };
38
39                         factory: partition@40000 {
40                                 label = "factory";
41                                 reg = <0x40000 0x10000>;
42                                 read-only;
43                         };
44
45                         partition@50000 {
46                                 label = "firmware";
47                                 reg = <0x50000 0x3b0000>;
48                         };
49                 };
50         };
51
52         gpio-keys-polled {
53                 compatible = "gpio-keys-polled";
54                 poll-interval = <20>;
55
56                 reset {
57                         label = "reset";
58                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
59                         linux,code = <KEY_RESTART>;
60                 };
61
62                 wps {
63                         label = "wps";
64                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
65                         linux,code = <KEY_WPS_BUTTON>;
66                 };
67         };
68
69         gpio-leds {
70                 compatible = "gpio-leds";
71
72                 wps {
73                         label = "tew-638apb-v2:orange:wps";
74                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
75                 };
76
77                 led_wps_green: wps2 {
78                         label = "tew-638apb-v2:green:wps";
79                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
80                 };
81         };
82 };
83
84 &pinctrl {
85         state_default: pinctrl0 {
86                 gpio {
87                         ralink,group = "uartf";
88                         ralink,function = "gpio";
89                 };
90         };
91 };
92
93 &ethernet {
94         mtd-mac-address = <&factory 0x4>;
95 };
96
97 &esw {
98         mediatek,portmap = <0x2f>;
99 };
100
101 &wmac {
102         ralink,mtd-eeprom = <&factory 0>;
103 };