target/linux/ramips/dts/SK-WB8.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
   7         model = "SamKnows Whitebox 8";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x8000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600";
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21                 wps {
  22                         label = "sk-wb8:green:wps";
  23                         gpios = <&gpio1 14 1>;
  24                 };
  25
  26                 usb {
  27                         label = "sk-wb8:green:usb";
  28                         gpios = <&gpio1 15 1>;
  29                 };
  30         };
  31
  32         gpio-keys-polled {
  33                 compatible = "gpio-keys-polled";
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36                 poll-interval = <20>;
  37                 wps {
  38                         label = "wps";
  39                         gpios = <&gpio1 11 1>;
  40                         linux,code = <0x211>;
  41                 };
  42                 reset {
  43                         label = "reset";
  44                         gpios = <&gpio1 9 1>;
  45                         linux,code = <0x198>;
  46                 };
  47         };
  48 };
  49
  50 &spi0 {
  51         status = "okay";
  52
  53         m25p80@0 {
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56                 compatible = "jedec,spi-nor";
  57                 reg = <0>;
  58                 linux,modalias = "m25p80";
  59                 spi-max-frequency = <10000000>;
  60
  61                 partition@0 {
  62                         label = "u-boot";
  63                         reg = <0x0 0x30000>;
  64                         read-only;
  65                 };
  66
  67                 partition@30000 {
  68                         label = "u-boot-env";
  69                         reg = <0x30000 0x10000>;
  70                 };
  71
  72                 factory: partition@40000 {
  73                         label = "factory";
  74                         reg = <0x40000 0x10000>;
  75                         read-only;
  76                 };
  77
  78                 partition@50000 {
  79                         label = "firmware";
  80                         reg = <0x50000 0x7b0000>;
  81                 };
  82
  83                 partition@e30000 {
  84                         label = "recovery";
  85                         reg = <0xe30000 0x1d0000>;
  86                 };
  87
  88         };
  89 };
  90
  91 &pcie {
  92         status = "okay";
  93
  94         pcie0 {
  95                 mt76@0,0 {
  96                         reg = <0x0000 0 0 0 0>;
  97                         device_type = "pci";
  98                         mediatek,mtd-eeprom = <&factory 0x8000>;
  99                         mediatek,2ghz = <0>;
 100                 };
 101         };
 102
 103         pcie1 {
 104                 mt76@1,0 {
 105                         reg = <0x0000 0 0 0 0>;
 106                         device_type = "pci";
 107                         mediatek,mtd-eeprom = <&factory 0x0000>;
 108                         mediatek,5ghz = <0>;
 109                 };
 110         };
 111 };
 112
 113 &ethernet {
 114         mtd-mac-address = <&factory 0xe000>;
 115 };
 116
 117 &pinctrl {
 118         state_default: pinctrl0 {
 119                 gpio {
 120                         ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
 121                         ralink,function = "gpio";
 122                 };
 123         };
 124 };