target/linux/ramips/dts/RT5350F-OLINUXINO.dtsi

   1 #include "rt5350.dtsi"
   2
   3 / {
   4         compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";
   5
   6     aliases {
   7         serial0 = &uartlite;
   8         serial1 = &uart;
   9     };
  10 };
  11
  12
  13 &spi0 {
  14         status = "okay";
  15
  16         m25p80@0 {
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19                 compatible = "jedec,spi-nor";
  20                 reg = <0>;
  21                 spi-max-frequency = <10000000>;
  22
  23                 partition@0 {
  24                         label = "u-boot";
  25                         reg = <0x0 0x30000>;
  26                         read-only;
  27                 };
  28
  29                 partition@30000 {
  30                         label = "u-boot-env";
  31                         reg = <0x30000 0x10000>;
  32                         read-only;
  33                 };
  34
  35                 factory: partition@40000 {
  36                         label = "factory";
  37                         reg = <0x40000 0x10000>;
  38                         read-only;
  39                 };
  40
  41                 partition@50000 {
  42                         label = "firmware";
  43                         reg = <0x50000 0x7b0000>;
  44                 };
  45         };
  46 };
  47
  48 &gpio1 {
  49         status = "okay";
  50 };
  51
  52 &pinctrl {
  53         state_default: pinctrl0 {
  54                 gpio {
  55                         ralink,group = "jtag", "rgmii", "mdio";
  56                         ralink,function = "gpio";
  57                 };
  58                 uartf_gpio {
  59                         ralink,group = "uartf";
  60                         ralink,function = "gpio uartf";
  61                 };
  62         };
  63 };
  64
  65 &ethernet {
  66         mtd-mac-address = <&factory 0x4>;
  67 };
  68
  69 &esw {
  70         mediatek,portmap = <0x2f>;
  71         mediatek,led_polarity = <0x17>;
  72 };
  73
  74 &wmac {
  75         ralink,mtd-eeprom = <&factory 0>;
  76         ralink,led-polarity = <1>;
  77 };
  78
  79 &ehci {
  80         status = "okay";
  81 };
  82
  83 &ohci {
  84         status = "okay";
  85 };
  86
  87 &i2c {
  88         status = "okay";
  89 };
  90
  91 &uart {
  92         status = "okay";
  93 };
  94