target/linux/ramips/dts/RT-N15.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         #address-cells = <1>;
  10         #size-cells = <1>;
  11         compatible = "asus,rt-n15", "ralink,rt2880-soc";
  12         model = "Asus RT-N15";
  13
  14         aliases {
  15                 led-status = &led_power;
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 partition@0 {
  27                         label = "uboot";
  28                         reg = <0x0 0x30000>;
  29                         read-only;
  30                 };
  31
  32                 partition@30000 {
  33                         label = "uboot-env";
  34                         reg = <0x30000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 factory: partition@40000 {
  39                         label = "factory";
  40                         reg = <0x40000 0x10000>;
  41                         read-only;
  42                 };
  43
  44                 partition@50000 {
  45                         label = "firmware";
  46                         reg = <0x50000 0x3b0000>;
  47                 };
  48         };
  49
  50         rtl8366s {
  51                 compatible = "realtek,rtl8366s";
  52                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  53                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  54         };
  55
  56         gpio-keys-polled {
  57                 compatible = "gpio-keys-polled";
  58                 #address-cells = <1>;
  59                 #size-cells = <0>;
  60                 poll-interval = <100>;
  61
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
  65                         linux,code = <KEY_WPS_BUTTON>;
  66                 };
  67
  68                 reset {
  69                         label = "reset";
  70                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  71                         linux,code = <KEY_RESTART>;
  72                 };
  73         };
  74
  75         gpio-leds {
  76                 compatible = "gpio-leds";
  77
  78                 led_power: power {
  79                         label = "rt-n15:blue:power";
  80                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  81                 };
  82         };
  83 };
  84
  85 &gpio0 {
  86         status = "okay";
  87 };
  88
  89 &pinctrl {
  90         state_default: pinctrl0 {
  91                 gpio {
  92                         ralink,group = "i2c", "uartlite", "mdio";
  93                         ralink,function = "gpio";
  94                 };
  95         };
  96 };
  97
  98 &ethernet {
  99         status = "okay";
 100         mtd-mac-address = <&factory 0x4>;
 101
 102         port@0 {
 103                 mediatek,fixed-link = <1000 1 1 1>;
 104         };
 105
 106         mdio-bus {
 107                 status = "okay";
 108
 109                 phy0: ethernet-phy@0 {
 110                         phy-mode = "mii";
 111                         reg = <0>;
 112                 };
 113         };
 114 };
 115
 116 &wmac {
 117         ralink,mtd-eeprom = <&factory 0>;
 118 };