target/linux/ramips/dts/RT-N10-PLUS.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "asus,rt-n10-plus", "ralink,rt3050-soc";
  10         model = "Asus RT-N10+";
  11
  12         aliases {
  13                 led-status = &led_wps;
  14         };
  15
  16         cfi@1f000000 {
  17                 compatible = "cfi-flash";
  18                 reg = <0x1f000000 0x800000>;
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21                 #address-cells = <1>;
  22                 #size-cells = <1>;
  23
  24                 partition@0 {
  25                         label = "u-boot";
  26                         reg = <0x0 0x30000>;
  27                         read-only;
  28                 };
  29
  30                 partition@30000 {
  31                         label = "devdata";
  32                         reg = <0x30000 0x10000>;
  33                         read-only;
  34                 };
  35
  36                 devconf: partition@40000 {
  37                         label = "devconf";
  38                         reg = <0x40000 0x10000>;
  39                         read-only;
  40                 };
  41
  42                 partition@50000 {
  43                         label = "firmware";
  44                         reg = <0x50000 0x3b0000>;
  45                 };
  46         };
  47
  48         gpio-leds {
  49                 compatible = "gpio-leds";
  50
  51                 led_wps: wps {
  52                         label = "rt-n10-plus:green:wps";
  53                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56
  57         gpio-keys-polled {
  58                 compatible = "gpio-keys-polled";
  59                 #address-cells = <1>;
  60                 #size-cells = <0>;
  61                 poll-interval = <20>;
  62
  63                 reset {
  64                         label = "reset";
  65                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  66                         linux,code = <KEY_RESTART>;
  67                 };
  68
  69                 wps {
  70                         label = "wps";
  71                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  72                         linux,code = <KEY_WPS_BUTTON>;
  73                 };
  74         };
  75 };
  76
  77 &ethernet {
  78         mtd-mac-address = <&devconf 0x4>;
  79 };
  80
  81 &esw {
  82         mediatek,portmap = <0x3e>;
  83 };
  84
  85 &wmac {
  86         ralink,mtd-eeprom = <&devconf 0>;
  87 };