target/linux/ramips/dts/RE6500.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
   9         model = "Linksys RE6500";
  10
  11         memory@0 {
  12                 device_type = "memory";
  13                 reg = <0x0 0x4000000>;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,57600";
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 wifi {
  24                         label = "re6500:orange:wifi";
  25                         gpios = <&gpio0 0 0>;
  26                 };
  27
  28                 power {
  29                         label = "re6500:white:power";
  30                         gpios = <&gpio0 9 0>;
  31                 };
  32         };
  33
  34         gpio-keys-polled {
  35                 compatible = "gpio-keys-polled";
  36                 #address-cells = <1>;
  37                 #size-cells = <0>;
  38                 poll-interval = <20>;
  39
  40                 wps {
  41                         label = "wps";
  42                         gpios = <&gpio0 10 1>;
  43                         linux,code = <KEY_WPS_BUTTON>;
  44                 };
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio0 11 0>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51         };
  52 };
  53
  54 &spi0 {
  55         status = "okay";
  56
  57         m25p80@0 {
  58                 #address-cells = <1>;
  59                 #size-cells = <1>;
  60                 compatible = "jedec,spi-nor";
  61                 reg = <0>;
  62                 linux,modalias = "m25p80", "en25q64";
  63                 spi-max-frequency = <10000000>;
  64
  65                 partition@0 {
  66                         label = "u-boot";
  67                         reg = <0x0 0x30000>;
  68                         read-only;
  69                 };
  70
  71                 partition@30000 {
  72                         label = "u-boot-env";
  73                         reg = <0x30000 0x10000>;
  74                         read-only;
  75                 };
  76
  77                 factory: partition@40000 {
  78                         label = "factory";
  79                         reg = <0x40000 0x10000>;
  80                         read-only;
  81                 };
  82
  83                 partition@50000 {
  84                         label = "firmware";
  85                         reg = <0x50000 0x7b0000>;
  86                 };
  87         };
  88 };
  89
  90 &pinctrl {
  91         state_default: pinctrl0 {
  92                 gpio {
  93                         ralink,group = "i2c", "uart2", "uart3", "rgmii2";
  94                         ralink,function = "gpio";
  95                 };
  96         };
  97 };
  98
  99 &pcie {
 100         status = "okay";
 101
 102         pcie0 {
 103                 mt76@0,0 {
 104                         reg = <0x0000 0 0 0 0>;
 105                         device_type = "pci";
 106                         mediatek,mtd-eeprom = <&factory 0x0000>;
 107                         mediatek,2ghz = <0>;
 108                 };
 109         };
 110
 111         pcie1 {
 112                 mt76@1,0 {
 113                         reg = <0x0000 0 0 0 0>;
 114                         device_type = "pci";
 115                         mediatek,mtd-eeprom = <&factory 0x8000>;
 116                         mediatek,5ghz = <0>;
 117                 };
 118         };
 119 };
 120
 121 &ethernet {
 122         mtd-mac-address = <&factory 0x2e>;
 123 };