target/linux/ramips/dts/RE6500.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "linksys,re6500", "mediatek,mt7621-soc";
  10         model = "Linksys RE6500";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21                 reg = <0x0 0x4000000>;
  22         };
  23
  24         chosen {
  25                 bootargs = "console=ttyS0,57600";
  26         };
  27
  28         gpio-leds {
  29                 compatible = "gpio-leds";
  30
  31                 wifi {
  32                         label = "re6500:orange:wifi";
  33                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
  34                 };
  35
  36                 led_power: power {
  37                         label = "re6500:white:power";
  38                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  39                 };
  40         };
  41
  42         gpio-keys-polled {
  43                 compatible = "gpio-keys-polled";
  44                 poll-interval = <20>;
  45
  46                 wps {
  47                         label = "wps";
  48                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_WPS_BUTTON>;
  50                 };
  51
  52                 reset {
  53                         label = "reset";
  54                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  55                         linux,code = <KEY_RESTART>;
  56                 };
  57         };
  58 };
  59
  60 &spi0 {
  61         status = "okay";
  62
  63         m25p80@0 {
  64                 compatible = "jedec,spi-nor";
  65                 reg = <0>;
  66                 spi-max-frequency = <10000000>;
  67                 m25p,chunked-io = <32>;
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         partition@0 {
  75                                 label = "u-boot";
  76                                 reg = <0x0 0x30000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@30000 {
  81                                 label = "u-boot-env";
  82                                 reg = <0x30000 0x10000>;
  83                                 read-only;
  84                         };
  85
  86                         factory: partition@40000 {
  87                                 label = "factory";
  88                                 reg = <0x40000 0x10000>;
  89                                 read-only;
  90                         };
  91
  92                         partition@50000 {
  93                                 label = "firmware";
  94                                 reg = <0x50000 0x7b0000>;
  95                         };
  96                 };
  97         };
  98 };
  99
 100 &pinctrl {
 101         state_default: pinctrl0 {
 102                 gpio {
 103                         ralink,group = "i2c", "uart2", "uart3", "rgmii2";
 104                         ralink,function = "gpio";
 105                 };
 106         };
 107 };
 108
 109 &pcie {
 110         status = "okay";
 111 };
 112
 113 &pcie0 {
 114         mt76@0,0 {
 115                 reg = <0x0000 0 0 0 0>;
 116                 mediatek,mtd-eeprom = <&factory 0x0000>;
 117                 ieee80211-freq-limit = <5000000 6000000>;
 118         };
 119 };
 120
 121 &pcie1 {
 122         mt76@0,0 {
 123                 reg = <0x0000 0 0 0 0>;
 124                 mediatek,mtd-eeprom = <&factory 0x8000>;
 125                 ieee80211-freq-limit = <2400000 2500000>;
 126         };
 127 };
 128
 129 &ethernet {
 130         mtd-mac-address = <&factory 0x2e>;
 131 };
 132
 133 &xhci {
 134         status = "disabled";
 135 };