5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "linksys,re6500", "mediatek,mt7621-soc";
10 model = "Linksys RE6500";
13 device_type = "memory";
14 reg = <0x0 0x4000000>;
18 bootargs = "console=ttyS0,57600";
22 compatible = "gpio-leds";
25 label = "re6500:orange:wifi";
26 gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
30 label = "re6500:white:power";
31 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
36 compatible = "gpio-keys-polled";
43 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_WPS_BUTTON>;
49 gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
50 linux,code = <KEY_RESTART>;
61 compatible = "jedec,spi-nor";
63 spi-max-frequency = <10000000>;
64 m25p,chunked-io = <32>;
74 reg = <0x30000 0x10000>;
78 factory: partition@40000 {
80 reg = <0x40000 0x10000>;
86 reg = <0x50000 0x7b0000>;
92 state_default: pinctrl0 {
94 ralink,group = "i2c", "uart2", "uart3", "rgmii2";
95 ralink,function = "gpio";
105 reg = <0x0000 0 0 0 0>;
107 mediatek,mtd-eeprom = <&factory 0x0000>;
108 ieee80211-freq-limit = <5000000 6000000>;
114 reg = <0x0000 0 0 0 0>;
116 mediatek,mtd-eeprom = <&factory 0x8000>;
117 ieee80211-freq-limit = <2400000 2500000>;
123 mtd-mac-address = <&factory 0x2e>;