5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "linksys,re6500", "mediatek,mt7621-soc";
10 model = "Linksys RE6500";
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
20 device_type = "memory";
21 reg = <0x0 0x4000000>;
25 bootargs = "console=ttyS0,57600";
29 compatible = "gpio-leds";
32 label = "re6500:orange:wifi";
33 gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
37 label = "re6500:white:power";
38 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
43 compatible = "gpio-keys-polled";
48 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_WPS_BUTTON>;
54 gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
55 linux,code = <KEY_RESTART>;
64 compatible = "jedec,spi-nor";
66 spi-max-frequency = <10000000>;
67 m25p,chunked-io = <32>;
70 compatible = "fixed-partitions";
82 reg = <0x30000 0x10000>;
86 factory: partition@40000 {
88 reg = <0x40000 0x10000>;
93 compatible = "denx,uimage";
95 reg = <0x50000 0x7b0000>;
102 state_default: pinctrl0 {
104 ralink,group = "i2c", "uart2", "uart3", "rgmii2";
105 ralink,function = "gpio";
116 reg = <0x0000 0 0 0 0>;
117 mediatek,mtd-eeprom = <&factory 0x0000>;
118 ieee80211-freq-limit = <5000000 6000000>;
124 reg = <0x0000 0 0 0 0>;
125 mediatek,mtd-eeprom = <&factory 0x8000>;
126 ieee80211-freq-limit = <2400000 2500000>;
131 mtd-mac-address = <&factory 0x2e>;