target/linux/ramips/dts/PSG1218.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "PSG1218", "ralink,mt7620a-soc";
   7         model = "Phicomm PSG1218";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 blue {
  13                         label = "psg1218:blue:status";
  14                         gpios = <&gpio0 10 0>;
  15                 };
  16
  17                 yellow {
  18                         label = "psg1218:yellow:status";
  19                         gpios = <&gpio0 11 0>;
  20                 };
  21
  22                 red {
  23                         label = "psg1218:red:status";
  24                         gpios = <&gpio0 8 1>;
  25                 };
  26         };
  27
  28         gpio-keys-polled {
  29                 compatible = "gpio-keys-polled";
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32                 poll-interval = <20>;
  33
  34                 reset {
  35                         label = "reset";
  36                         gpios = <&gpio0 1 1>;
  37                         linux,code = <0x198>;
  38                 };
  39         };
  40 };
  41
  42 &gpio0 {
  43         status = "okay";
  44 };
  45
  46 &spi0 {
  47         status = "okay";
  48
  49         m25p80@0 {
  50                 #address-cells = <1>;
  51                 #size-cells = <1>;
  52                 compatible = "jedec,spi-nor";
  53                 reg = <0>;
  54                 linux,modalias = "m25p80", "en25q64";
  55                 spi-max-frequency = <10000000>;
  56
  57                 partition@0 {
  58                         label = "u-boot";
  59                         reg = <0x0 0x30000>;
  60                         read-only;
  61                 };
  62
  63                 partition@20000 {
  64                         label = "u-boot-env";
  65                         reg = <0x30000 0x10000>;
  66                         read-only;
  67                 };
  68
  69                 factory: partition@30000 {
  70                         label = "factory";
  71                         reg = <0x40000 0x10000>;
  72                         read-only;
  73                 };
  74
  75                 partition@40000 {
  76                         label = "firmware";
  77                         reg = <0x50000 0x7b0000>;
  78                 };
  79         };
  80 };
  81
  82 &pinctrl {
  83         state_default: pinctrl0 {
  84                 gpio {
  85                         ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
  86                         ralink,function = "gpio";
  87                 };
  88
  89                 pa {
  90                         ralink,group = "pa";
  91                         ralink,function = "pa";
  92                 };
  93         };
  94 };
  95
  96 &ethernet {
  97         pinctrl-names = "default";
  98         pinctrl-0 = <&ephy_pins>;
  99         mtd-mac-address = <&factory 0x28>;
 100         mediatek,portmap = "llllw";
 101 };
 102
 103 &pcie {
 104         status = "okay";
 105
 106         pcie-bridge {
 107                 mt76@0,0 {
 108                         reg = <0x0000 0 0 0 0>;
 109                         device_type = "pci";
 110                         mediatek,mtd-eeprom = <&factory 0x8000>;
 111                         mediatek,2ghz = <0>;
 112                 };
 113         };
 114 };
 115
 116 &wmac {
 117         ralink,mtd-eeprom = <&factory 0>;
 118 };